Zanussi ZSF 6066 Prior to using for the first time, Water softener, Setting manually, Examples

Page 6
Turn the water hardness dial to position 1 or 2 (see table).

Prior to using for the first time

Before using your dishwasher for the first time:

1.Ensure that the electrical and water connections comply with the installation instructions

2.Remove all packaging from inside the appliance

3.Set the water softener

4.Pour 1 litre of water inside the salt container and then fill with dishwasher salt

5.Fill the rinse aid dispenser

Note:

If you want to use the "3 in 1" combi detergents, carefully read the information given in "Different kinds of detergents".

The water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these minerals and salts, the harder your water is.

Water hardness is measured in equivalent scales, Clarke degrees, French degrees (TH°) and mmol/l (millimol per litre - international unit for the hardness of water).

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The water softener must be set in both ways: manually, using the water hardness dial and electronically, using the programme selector dial and the Start/Cancel button.

a) Setting manually

1.Open the dishwasher door.

2.Remove the lower basket from the dishwasher.

3.

4. Replace the lower basket.

The dishwasher is factory set at position 2.

b)Setting electronically

(The dishwasher must be switched off)

The dishwasher is factory set at level 5.

1.Keep the Start/Cancel button pressed and turn the programme selector dial clockwise until the programme selection marker corresponds with the first washing programme.

The On-Off and Start/Cancel indicator lights start to flash indicating that you have activated the water softener setting function.

At the same time, the End indicator light starts flashing.

The current level is indicated by the number of flashes of the End indicator light and a pause of about 5 seconds.

Example: 5 flashes, pause, 5 flashes, pause, etc...= level 5

2.To change the level, press the Start/Cancel button.

Each time this button is pressed the level changes. (For the selection of the new level, see chart).

Examples:

If current level is 5, by pressing the Start/Cancel button once, level 6 is selected.

If current level is 10, by pressing the Start/Cancel button once, level 1 is selected.

The End indicator light remains off for about 5 seconds and then starts flashing indicating the new set made.

3.To memorise the operation, switch off the machine by returning the programme selector dial to the Off position, that is the programme selection marker corresponds with the On-Off indicator light.

Otherwise wait for about 60 seconds, after which the dishwasher will automatically return to setting mode.

 

Water hardness

 

Adjustment of the water

Number of flashes of the

Use

 

 

 

 

hardness setting

"End"

of salt

Clarke

°TH

 

mmol/l

manually

electronically

indicator light

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

64 - 88

91 - 125

 

9,0 - 12,5

2

level 10

10

yes

 

 

 

 

 

 

 

 

53 - 63

76 - 90

 

7,6 - 8,9

2

level 9

9

yes

 

 

 

 

 

 

 

 

46 - 52

65 - 75

 

6,5 - 7,5

2

level 8

8

yes

 

 

 

 

 

 

 

 

36 - 45

51 - 64

 

5,1 - 6,4

2

level 7

7

yes

 

 

 

 

 

 

 

 

28 - 35

40 - 50

 

4,0 - 5,0

2

level 6

6

yes

 

 

 

 

 

 

 

 

23 - 27

33 - 39

 

3,3 - 3,9

2

level 5

5

yes

 

 

 

 

 

 

 

 

18 - 22

26 - 32

 

2,6 - 3,2

1

level 4

4

yes

 

 

 

 

 

 

 

 

13 - 17

19 - 25

 

1,9 - 2,5

1

level 3

3

yes

 

 

 

 

 

 

 

 

5 - 12

7 - 18

 

0,7 - 1,8

1

level 2

2

yes

 

 

 

 

 

 

 

 

< 5

< 7

 

< 0,7

1

level 1

1

no

 

 

 

 

 

 

 

 

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Dishwasher Contents Child safety Safety instructionsInstallation DisposalDescription of the appliance Wash Delay start buttonStart/cancel button DryIndicator light Prior to using for the first timeSetting manually Water softenerRinse aid Adjusting the doseFilling with dishwasher salt Filling with rinse aidLower basket Daily useLoading cutlery and dishes Are of limited suitabilityCutlery basket Upper basketTo move to the higher position proceed as follows Adjusting the height of the upper basketUse of detergent Fill with detergentConcentrated detergent Different kinds of detergentDetergent tablets Use of 3 in 1 combi detergentsWashing programmes End of the washing programme To interrupt or cancel a washing programme in progressStarting a washing programme Unloading the dishwasherFrost precautions Maintenance and cleaningCleaning the filters Prolonged periods of non-operationFault code / malfunction Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Malfunction Possible cause SolutionsDishes are wet and dull Dishes are not cleanWash results are not satisfactory Water drops have dried onto glasses and dishesService and Spare Parts Customer Care DepartmentMajor Appliances European Guarantee Guarantee ConditionsStandard Guarantee Conditions ExclusionsLevelling Installation instructionsFitting under a counter Water supply connectionsElectrical connection Green and Yellow Earth Blue- Neutral Brown- LiveHints for test centres Cup racks position aPage Page From the Electrolux Group. The World’s No.1 choice

ZSF 6066 specifications

The Zanussi ZSF 6066 is a compact, undercounter dishwasher designed to bring efficiency and convenience to any kitchen. With its sleek design and powerful features, this model is ideal for those seeking a reliable appliance that occupies minimal space while delivering superior cleaning results.

One of the standout features of the Zanussi ZSF 6066 is its capacity to accommodate up to 10 place settings. This makes it a great option for small families or those who entertain guests regularly. The flexible basket system allows for easy loading and unloading, meaning you can fit a range of dishware sizes and shapes without hassle. This thoughtful design ensures that larger pots and pans have a designated space, optimizing the interior layout.

Energy efficiency is a key characteristic of the ZSF 6066. It operates using relatively low water and energy consumption, which is not only eco-friendly but also helps reduce utility bills. The Energy Rating is A+, making it a suitable choice for environmentally conscious consumers.

The appliance is equipped with several washing programs tailored to different cleaning needs. These include Eco, Intensive, and Rapid modes, catering to everything from lightly soiled dishes to heavily soiled cookware. The Eco program is particularly notable, as it uses less water and energy without compromising on cleaning performance.

The built-in delay start feature is another highlight, allowing users to set the dishwasher to run at a more convenient time, thus taking advantage of off-peak electricity rates. The ZSF 6066 also incorporates a salt light indicator and rinse aid indicator, providing users with peace of mind regarding maintenance.

Moreover, the noise level of the Zanussi ZSF 6066 is impressively low, operating at just 49 dB. This makes it suitable for open-plan living spaces where minimal disruption is desired.

Safety is paramount in any kitchen appliance, and the ZSF 6066 comes equipped with a child lock feature, ensuring that little ones cannot accidentally access the machine while it's in use.

In summary, the Zanussi ZSF 6066 embodies reliability and practicality, offering efficient cleaning, a variety of wash programs, and user-friendly features. Its compact design and energy-efficient operation make it a smart choice for small homes and apartments, providing the essential functions of a larger dishwasher without taking up excessive space.
Top Page Image Contents