The control panel
Indicator and Reset position control lamps On/Off Indicator
lamp
Programme | Delay start |
selector | button |
Start/Cancel | |
| button |
Programme selector
Turn the programme selector clockwise or anticlockwise to select the programme and temperature according to the programme chart.
Start/Cancel button
In addition to starting a programme you can, by pressing this button, adjust the setting of the water softener and cancel a programme in progress.
= reset position
Indicator lamps:
Shows current phase of the selected programme.
• Wash cycle in progress | top lamp |
• Drying in progress | middle lamp |
• Programme cycle | lowest lamp |
ended |
|
Control lamp:
Shows that refilling of salt container is necessary
How to set the delayed start
The programme start can be delayed by 3 hours.
1. Select the desired dishwashing programme. The programme indicator lamps starts to flash.
2.Press the delay start button. The lamp for the delayed start lights up.
3.Press the start button. The programme indicator lamps goes out. The programme will start when 3 hours have elapsed.
Cancelling the delayed start:
Press the delay start button, the lamp for the delayed start goes out. The required programme starts immediately.
- 6 -