Zanussi ZSF 2420 manual Installation instructions, Technical specifications

Page 15

Installation instructions

Any electrical work required to install this appliance, should be carried out by a qualified electrician or competent person.

Any plumbing work required to install this appliance, should be carried out by a qualified plumber or competent person.

Technical specifications

Capacity:

6 place settings accordance EN 50242

 

 

 

 

Dimensions:

Height

447 mm

 

Width

546 mm

 

Depth (to the edge of the door)

480 mm

 

Depth (to the middel of the door)

507 mm

 

 

 

Weight:

Net

22 kg

 

 

 

Water pressures:

Minimum

80 kPa (0,8 bar)

 

Maximum

1000 kPa (10 bar)

Water temperature:

Cold water fill only

 

 

 

 

Electrical data:

Power supply

230 V - 50 Hz

 

Fuse

10 A

 

Heating element

1000 W

 

Power rating

1080 W

 

 

 

This appliance complies with the following E.E.C. directives:

73/23/EEC, dated 19.02.1973 – low-voltage directive.

89/336/EEC, dated 03.05.1989 (incl. amendment

92/31/EEC) – directive on electromagnetic compatibility.

- 15 -

Image 15
Contents S H WA S H E R Contents Conservation Safety informationInstallation and servicing Child SafetyDescription of the appliance Detergent dispenser Spray armCoarse strainer/microfilter Fine filterHow to set the delayed start Control panelButton Water softener Light flashes Adjusting the water softenerProgramme chart Unloading How to load the dishesUse care when opening the door as hot steam may escape Loading and unloading the dishwasherSwitching the dishwasher off Using the applianceCancelling the programme Cancelling the drying phaseMaintenance and cleaning Something Not Working Fault CheckService This guarantee does not cover Guarantee ConditionsTechnical specifications Installation instructionsPositioning UnpackingDamages UseInstallation Water inletWater drainage Green and Yellow Earth Blue- Neutral Brown- Live Power supplyInformation for test centres Electrolux plc