Audible signals
Audible signals have been introduced to help indicate which operations the dishwasher is performing.
Short "instruction accepted" signal
When any of the push buttons are pressed (except the
On/Off push button), a short audible signal informs you that the machine has accepted the instruction given.
Long "programme run" signal
A continuous audible signal informs you that the washing programme is starting.
Intermittent "end of programme" signal
An intermittent audible signal informs you that the wash programme has ended.
"Alarm" intermittent signal
The machine is fitted with a number of alarm systems to help you determine the cause of any problems (see "Something not working").
An intermittent audible signal informs you that an alarm is activated.
To deactivate these audible signals, | press simultaneously | ||||
and keep pressed both | HALF LOAD | and DELAY | push | ||
buttons | for about | 5 seconds, until you hear 3 short intermittent |
| ||
audible | signals, | this means that the audible signals have been |
| ||
deactivated.
SO433
To reactivate these audible signals, | press simultaneously | ||||
and keep pressed both | HALF LOAD | and DELAY | push | ||
buttons | for about | 5 seconds, until you hear 3 short intermittent |
| ||
audible | signals, | this means that the audible signals have been |
| ||
reactivated.
Both operations (to deactivate or reactivate the audible signals) must be carried out before starting a washing programme; the setting will remain memorised after switching off the dishwasher.
5