Zanussi ZDT 312 Set the water softener, When using tablets that integrate rinse aid and detergent

Page 9

When using tablets that integrate rinse aid and detergent:

there is no need to fill up with rinse aid

set the water softener

add special (dishwasher) salt

When using tablets that integrate rinse aid, detergent, salt function and other additives:

there is no need to fill up with special salt or rinse aid.

Check whether these detergents are suitable for your water hardness. Follow the manufac- turers instructions.

– Set the water hardness to level 1.

IMPORTANT!

If the drying results are not satisfactory we rec- ommend that you:

1.Fill up the rinse aid dispenser with rinse aid.

2.Set the rinse aid dosage to position 2.

If you decide in future to use separated deter- gents, we advise that you:

Fill up the salt and rinse aid container.

Adjust the water hardness setting to the highest level and perform 1 normal washing programme without loading any dishes.

Adjust the water hardness setting according to the hardness of the water in your area.

Adjust the rinse aid dosage

Set the water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a det- rimental or adverse effect on the operation of the appliance.

The higher the content of these minerals and salts, the harder your water is.

Water hardness is measured in equivalent scales, Clarke degrees, French degrees (°TH)

and mmol/l (millimol per litre - international unit for the hardness of water).

The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

Clarke

64 - 88

53 - 63

Water hardness

°TH

91 - 125

76 - 90

mmol/l

9,0- 12,5

7,6 - 8,9

Adjusting the water hardness

setting

manually

 

electronically

2

 

level 10

2

 

level 9

 

 

 

Use of salt

yes

yes

9

Image 9
Contents Dishwasher ZDT Contents General safety Safety informationChild safety Correct useInstallation Control panelFunctions buttons Indicator lights Audible signals Select and start a washing programmeDeactivation/activation of the audible sig- nals Cancel a washing programme in progress Cancelling the delay startInterrupt a washing programme in pro- gress End of the washing programmeFirst use Washing programmesDegree of soil Type of loadSet the water softener When using tablets that integrate rinse aid and detergentClarke Water hardness Mmol/l Use of saltSetting the water softener electronically see table Setting the water softener manually see tableDishwasher is factory set at level Water hardness Clarke Mmol/lExamples Filling with dishwasher saltFilling with rinse aid Loading cutlery and dishes Adjusting the dosage of rinse aidAre of limited suitability Maximum height of the dishes Adjusting the height of the upper basketUpper basket Lower basketDetergent tablets Use of detergentCare and cleaning Cleaning the filtersUnloading the dishwasher External cleaning Cleaning the spray armsInternal cleaning Frost precautionsEnvironmental concerns Something not workingPackaging material Possible cause and solution Fault code and malfunctionWash results are not satisfactory Consumption valuesHints for test institutes Technical dataInstallation Full load 12 standard place settingsWater connection Drain hose Inlet hoseElectrical connection Fitting under a counterLevelling Page Page 156991180-00-26112007

ZDT 312 specifications

The Zanussi ZDT 312 is a well-designed dishwasher that caters to the needs of modern households. Known for its reliability and efficiency, this model has become a popular choice for those looking to streamline their dishwashing experience. With its sleek appearance and user-friendly features, it stands out in the crowded market of kitchen appliances.

One of the main features of the Zanussi ZDT 312 is its excellent energy efficiency. It is rated A+ for energy consumption, which means it operates effectively while minimizing the impact on your electricity bill. This not only helps in reducing household expenses but also contributes positively to the environment. The machine utilizes innovative technologies that ensure optimal water usage, ensuring that it gets the job done without wasting resources.

Another defining characteristic of this dishwasher is its capacity. The Zanussi ZDT 312 can hold up to 13 place settings in a single load, making it an ideal choice for families or those who frequently entertain guests. Its interior is designed to accommodate various dish sizes, thanks to adjustable rack heights and foldable tines. This thoughtful layout allows for greater flexibility in loading and organizing dishes, pots, and cutlery.

The dishwasher incorporates several specialized programs to provide excellent cleaning performance. The Quick Wash feature, for instance, is a lifesaver for those who need clean dishes in a hurry. It delivers a thorough wash in significantly less time than traditional cycles. Additionally, the Intensive Cycle is perfect for heavily soiled pots and pans, ensuring that even the toughest grime is tackled effectively.

In terms of convenience, the Zanussi ZDT 312 offers a delay timer function, which allows users to schedule washes at their convenience. This is particularly useful for running the dishwasher during off-peak energy hours. The appliance is also designed with a noise-reducing feature, operating at a quiet 49 decibels, making it suitable for open-plan living spaces.

Moreover, the dishwasher boasts a reliable and durable build quality, which ensures longevity and consistent performance. With easy-to-navigate controls and an intuitive display, users will find it simple to select the desired washing cycle.

In summary, the Zanussi ZDT 312 is a well-rounded dishwasher that excels in energy efficiency, capacity, versatility, and user convenience. Its combination of advanced technology and practical features makes it an excellent addition to any kitchen, catering to everyday needs while promoting a sustainable lifestyle.