Zanussi ZDS 2010 user manual Use of rinse aid, Do these steps to fill the rinse aid dispenser

Page 7

Fill the salt container with 1 litre of water (only the first operation).

It is normal that water overflows from the salt con- tainer when you fill it with salt.

Make sure that there is no grain of salt outer of the salt compartment. Salt which stays on the tank for a while drills the tank. It is recommended to start a wash-

ing programme immediately after you fill the salt con- tainer. This prevents of corrosion because of spilled salt.

When you set electronically the water softener to level 1, the salt indicator light does not stay on.

Use of rinse aid

Caution! Only use branded rinse aid for dishwashers.

Do these steps to fill the rinse aid dispenser:

Image 7

Contents Dishwasher ZDS Safety information ContentsDo not use the appliance Contact your local Service Force CentreIndicator lights Control panelWashing programmes Delay start buttonConsumption values Can change these values Setting the water softenerUse of the appliance Quick 65 a Economy 120 0,9 PrewashUse of dishwasher salt Manual adjustmentElectronic adjustment Water hardness setting ManuallyDo these steps to fill the rinse aid dispenser Use of rinse aidPut small objects in the cutlery basket Adjusting the dosage of rinse aidLoading cutlery and dishes Helpful hints and tipsCup racks up Use of detergentMaximum height of the dishes Use of combi detergent tablets Setting and starting a washing programmeCancelling a washing programme Setting and starting a washing programme with delay startEnd of the washing programme Care and cleaningCleaning the filters Cancelling a delay startPossible cause and solution External cleaningFrost precautions Fault code and malfunctionCleaning results are not satisfactory Technical dataFitting under a counter InstallationPlace settings Environment concernsDrain hose Adjusting the level of the applianceWater connection Water inlet hoseElectrical connection Page Page Page 117952390 00