Zanussi ZSF 2440 manual Using the appliance

Page 10

Using the appliance

Starting the programme

1. Scrape or rinse off solid food remnants.

2.Load the dishwasher.

(See the basket and loading).

3.Put the correct amount of detergent into the detergent dispenser and close the lid.

4.Close the door.

5.Press in the On/Off button. All programme indicator lamps are lit.

6.Press in the required programme button (see pro- gramme chart). All other programme indicator lamps go out. The lamp always indicates which part of the selected cycle the dishwasher is in.

7.Check the filters to see if they need to be cleaned when the dishwasher has finished the programme.

Interrupting the programme temporarily

1. Open the door. The programme stops.

2.The programme indicator lamp is lit.

3.Close the door and the programme continues after about six seconds.

Open the door carefully when the dishwasher is running, since hot steam may escape.

Cancelling the programme

1. Press and hold in the combination buttons, the machine goes to starting position and all pro- gramme indicator lamps are lit.

2.Release the buttons. The programme is now cancelled and a new programme can be selected.

If you switch the dishwasher off with the On/Off button, the selected programme is not finished, it is only disrupted. When you start the dishwasher again, the programme will continue.

Pause function

With the pause function the programme can be temporarily interrupted for a short period of time.

1. Press in the On/Off button. The programme stops.

2.All lamps goes out.

3.When you want the programme to continue again, you press the On/Off button. The programme continues.

The programme should not be paused for any longer then necessary, because the water inside the dishwasher has cooled down and must be heated again which increases the power consumption.

Cancelling the drying phase

In case you do not want to wait until the drying phase is completed, you can cancel it.

1. Press in the On/Off button.

2. Open the door. The drying phase is cancelled.

Switching the dishwasher off

Switch the dishwasher off, when the indicator lamp for the programme cycle end is lit or the display shows 0.

1. Press in the On/Off button.

Leave the door slightly ajar.

Be careful if you open the door immediately after the programme is finished, since hot steam may escape.

This dishwasher is equipped with the new flush system called ”IMPULSE WASHING”. This washing system varies both the revolutions of the pump and the water pressure for more inten- sive cleaning of the dishes during a programme. That is why different sections of the programme cycle do not sound the same.

- 10 -

Page 9 Page 11
Image 10
Page 9 Page 11
Contents S H WA S H E R Contents Child Safety Safety informationInstallation and servicing ConservationDescription of the appliance Fine filter Spray armCoarse strainer/microfilter Detergent dispenserHow to set the delayed start Control panelAdjusting the water softener Water softenerProgramme chart Loading and unloading the dishwasher How to load the dishesUse care when opening the door as hot steam may escape UnloadingUsing the appliance Maintenance and cleaning Fault Check Something Not WorkingService Guarantee Conditions This guarantee does not coverInstallation instructions Technical specificationsUse UnpackingDamages PositioningWater inlet InstallationWater drainage Power supply Green and Yellow Earth Blue- Neutral Brown- LiveInformation for test centres Electrolux plc

ZSF 2440 specifications

The Zanussi ZSF 2440 is a compact and efficient dishwasher designed to cater to the needs of modern households. With an emphasis on performance and ease of use, this model is a superb addition to any kitchen, ensuring that cleaning up after meals is as seamless as possible.

One of the standout features of the Zanussi ZSF 2440 is its impressive energy efficiency. This dishwasher is rated highly for energy consumption, which not only helps reduce environmental impact but also lowers utility bills. It operates quietly, ensuring that it can run at any time without disturbing your home’s tranquility.

The Zanussi ZSF 2440 is equipped with a range of flexible loading options, accommodating various types of dishware. The adjustable upper basket allows for taller items to be cleaned without hassle. The lower basket is designed to hold pots and pans securely, ensuring optimal cleaning. The cutlery basket is also removable, providing more versatility when loading and unloading dishes.

This dishwasher features multiple wash programs tailored to different needs. From eco modes, which minimize water and energy consumption, to intensive cycles for heavily soiled pots and cookware, users have numerous options to choose from. The quick wash program is particularly beneficial for those who need clean dishes in a hurry, allowing for a thorough clean in a fraction of the time.

The Zanussi ZSF 2440 boasts advanced technology such as the auto-sensor feature, which automatically detects the level of soiling and adjusts the wash cycle accordingly. This ensures that every wash is both effective and efficient, using just the right amount of water and energy.

In terms of design, the appliance is sleek and fits seamlessly into most kitchen aesthetics. Its user-friendly control panel makes programming various settings simple, even for those who are not particularly tech-savvy. The LED display provides clear information about the cycle status, remaining time, and chosen settings.

Safety is another priority for Zanussi, as evidenced by features like child lock and overflow protection. These functionalities ensure that the dishwasher operates safely even in busy households.

In summary, the Zanussi ZSF 2440 dishwasher combines efficiency, versatility, and user-friendly technology, making it a reliable choice for anyone looking to simplify their kitchen clean-up process. With its thoughtful design and advanced features, the ZSF 2440 proves to be an excellent investment for maintaining cleanliness with minimal effort.
Top Page Image Contents