Zanussi ZSF 2440 manual Installation, Water inlet, Water drainage

Page 17

Installation

Water inlet

The dishwasher is equipped with safety features which are to prevent the water from going back to the fresh water system. These features are ac- cording to current water technical safety regulations.

The dishwasher should be permanently plumbed into a separate cold water supply.

The water pressure must be within the limits given in the technical specifications, as it will not function correctly if pressure is outside these specifications.

Your local Water Authority will advise you on the average mains pressure in your area. Where the water is supplied from a cold water cistern you can work out the pressure yourself by measuring the vertical distance (or ‘Head’) between the dishwasher’s inlet hose and the outlet from the cold water storage cistern; allowing .86 psi for every 2 feet under normal conditions.

We would advise you to have a shut-off valve or stop- cock in the water supply pipe close to the dishwasher and accessible for easy use. This should be turned off when the appliance is not in use. Connect the inlet hose to a tap with a 3/4" pipe thread.

The inlet hose must not be joined onto any form of exten- sion hose. If it is too short, the entire hose must be repla- ced with a longer high-pressure hose, specially designed for the purpose. The end of the hose, which is connected to the dishwasher can be turned in any direction. Loosen the retaining nut, turn the hose, then retighten the nut.

Check that the nut and all other connections are tight before the machine is moved into position.

Use only the inlet hose supplied to the dish- washer. Do not reuse an inlet hose used with a previous machine.

Water drainage

To protect the dishwasher against water damage it is equipped with a water safety system. In the event of a fault the drain-pump starts automatically and the remaining water inside the dishwasher is pumped out.

The water safety system also works when the dishwasher is switched off. However the dish- washer must be connected electrically.

Place the discharge hose over the sink as illustrated. It must not at any point be higher up than 75 cm over the surface which the dishwasher is standing on. If it runs higher, operation of the dishwasher might be impaired.

It is also important to ensure that the inside diameter of the hose is not less than 13 mm at any point. If the discharge hose is too long, it can easily be cut to the right length.

1. Cut the hose to a suitable length, using a sharp knife.

2. Fit the elbow supplied onto the end of the hose.

- 17 -

Image 17
Contents S H WA S H E R Contents Installation and servicing Safety informationChild Safety ConservationDescription of the appliance Coarse strainer/microfilter Spray armFine filter Detergent dispenserControl panel How to set the delayed startWater softener Adjusting the water softenerProgramme chart Use care when opening the door as hot steam may escape How to load the dishesLoading and unloading the dishwasher UnloadingUsing the appliance Maintenance and cleaning Something Not Working Fault CheckService This guarantee does not cover Guarantee ConditionsTechnical specifications Installation instructionsDamages UnpackingUse PositioningWater drainage InstallationWater inlet Green and Yellow Earth Blue- Neutral Brown- Live Power supplyInformation for test centres Electrolux plc

ZSF 2440 specifications

The Zanussi ZSF 2440 is a compact and efficient dishwasher designed to cater to the needs of modern households. With an emphasis on performance and ease of use, this model is a superb addition to any kitchen, ensuring that cleaning up after meals is as seamless as possible.

One of the standout features of the Zanussi ZSF 2440 is its impressive energy efficiency. This dishwasher is rated highly for energy consumption, which not only helps reduce environmental impact but also lowers utility bills. It operates quietly, ensuring that it can run at any time without disturbing your home’s tranquility.

The Zanussi ZSF 2440 is equipped with a range of flexible loading options, accommodating various types of dishware. The adjustable upper basket allows for taller items to be cleaned without hassle. The lower basket is designed to hold pots and pans securely, ensuring optimal cleaning. The cutlery basket is also removable, providing more versatility when loading and unloading dishes.

This dishwasher features multiple wash programs tailored to different needs. From eco modes, which minimize water and energy consumption, to intensive cycles for heavily soiled pots and cookware, users have numerous options to choose from. The quick wash program is particularly beneficial for those who need clean dishes in a hurry, allowing for a thorough clean in a fraction of the time.

The Zanussi ZSF 2440 boasts advanced technology such as the auto-sensor feature, which automatically detects the level of soiling and adjusts the wash cycle accordingly. This ensures that every wash is both effective and efficient, using just the right amount of water and energy.

In terms of design, the appliance is sleek and fits seamlessly into most kitchen aesthetics. Its user-friendly control panel makes programming various settings simple, even for those who are not particularly tech-savvy. The LED display provides clear information about the cycle status, remaining time, and chosen settings.

Safety is another priority for Zanussi, as evidenced by features like child lock and overflow protection. These functionalities ensure that the dishwasher operates safely even in busy households.

In summary, the Zanussi ZSF 2440 dishwasher combines efficiency, versatility, and user-friendly technology, making it a reliable choice for anyone looking to simplify their kitchen clean-up process. With its thoughtful design and advanced features, the ZSF 2440 proves to be an excellent investment for maintaining cleanliness with minimal effort.