Zanussi ZDS 300 manual Indicator lights, Activation/deactivation of the rinse aid dispenser

Page 7

Indicator lights

Phase indicator lights: have the following meanings:

Wash: illuminates when the washing and rinsing phases are running.

Drying: illuminates when the drying phase is running.

End of programme: illuminates when the washing programme has ended.

It also has added functions of visual signalling as:

-the setting of the water softener,

-activation/deactivation of the rinse aid dispenser,

-intervention of an alarm due to the malfunction of the machine.

As soon as you select a washing programme, the phase indicator lights for that programme will start flashing.

As the programme starts, the phase indicator lights turn off except for the indicator light of the phase in progress which will remain lit with a static light.

Control indicator lights: have the following meanings:

Salt refilling indicator light: illuminates when the salt has run out.

Rinse aid refilling indicator light: illuminates when the rinse aid has run out.

The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and rinse aid is necessary.

"3 in 1" button: this appliance is equipped with the 3 in 1 function, that allows the use of the "3 in 1" combi detergent tablets.

This function can be selected with all washing programmes. With the selection of this function the inflow of rinse aid and salt from each respective supply container is automatically deactivated and also the indicator lights for salt and rinse aid are deactivated.

Select the 3 in 1 function before the setting of a washing programme.

Once selected this option (button indicator light illuminated ) it will remain active also for the following washing programmes, to deactivate the function, press the button (button indicator light off).

With the use of 3 in 1 combi detergent tablets, the cycle durations given in the "Washing programmes" chart may change.

NOTE: Once the programme is running, the 3 in 1 function can NO longer be changed. If you want to exclude the 3 in 1 function you have to cancel the programme setting and then deactivate the 3 in 1 function by pressing the 3 in 1 button.

In this case you have to set a washing programme again (and eventual options). To cancel the running programme see "Starting a washing programme" ("To cancel a washing programme in progress").

NOTE: in case that drying results are not satisfactory it is possible to activate only the rinse aid dispenser.

The activation/deactivation of the rinse aid dispenser can be carried out only with the 3 in 1 function active.

Activation/deactivation of the rinse aid dispenser

(The dishwasher must be switched off)

With the activation of the rinse aid dispenser also the rinse aid indicator light on the control panel is automatically activated.

1.Press the On/Off button. The On/Off indicator light illuminates (setting mode).

If a programme button indicator light is on, this means that a washing programme has been set. The programme must be cancelled: press simultaneously the function buttons 2 and 3 for about 2 seconds.

All the indicator lights will turn off (except for the On/Off indicator light) indicating that the set programme has been cancelled and the machine is now in setting mode.

2.Press simultaneously function buttons 2 and 3, until the indicator lights of the function buttons 1, 2 and 3 start flashing.

3.Press the function button 2, the indicator lights of function buttons 1 and 3 turn off while the indicator light of the function button 2 goes on flashing.

4.To activate the rinse aid dispenser, press the function button 2 again, the indicator light end of programme illuminates, indicating that the rinse aid dispenser has been activated.

5.To memorise the operation, switch off the dishwasher by pressing the On/Off button or wait about 60 seconds after which the dishwasher will automatically return to setting mode.

To deactivate the rinse aid dispenser follow the above instructions until the indicator light end of programme turns off.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Dishwasher Contents Disposal Safety instructionsInstallation Child safetyWater supply connections Installation instructionsFitting under a counter LevellingElectrical connection Water outlet hose connectionControl panel Description of the applianceActivation/deactivation of the rinse aid dispenser Indicator lightsWater softener Prior to using for the first timeSetting manually Setting electronicallyFilling with rinse aid Adjusting the doseFilling with dishwasher salt Rinse aidAre of limited suitability Daily useLoading cutlery and dishes Lower basketTo move to the higher position proceed as follows Adjusting the height of the upper basketCutlery basket Upper basketFill with detergent Use of detergentCombi detergents Different kinds of detergentDetergent tablets Concentrated detergentWashing programmes Starting a washing programme Prolonged periods of non-operation Maintenance and cleaningCleaning the filters Frost precautionsMalfunction Possible cause Solutions Flashing fault code appearsThere are problems when operating the dishwasher Fault code / malfunction Possible cause SolutionsDishes are wet and dull Service and spare partsDishes are not clean Wash results are not satisfactoryCup racks position a Hints for test centres01/05

ZDS 300 specifications

The Zanussi ZDS 300 is a stylish and efficient integrated dishwasher designed to meet the needs of modern households. With its blend of innovative features and practical design, this appliance ensures that dishwashing becomes a hassle-free task.

One of the standout features of the ZDS 300 is its energy efficiency. Rated with a high energy efficiency class, it ensures that users save on electricity bills while being environmentally conscious. The dishwasher operates quietly, making it suitable for open-plan living spaces. This is particularly important for families and individuals who value a serene home environment.

The ZDS 300 boasts a spacious interior that can accommodate a generous load of dishes. Its flexible racking system allows users to easily adjust the layout to fit larger pots and pans. This adaptability ensures that every load, no matter the size or shape of the items, is utilized effectively. In addition, the dishwasher is equipped with multiple wash programs tailored to various cleaning needs, from light cycles for delicate glassware to heavy-duty options for stubborn, baked-on stains.

Another technological advancement in the ZDS 300 is the advanced water filtration system, designed to eliminate impurities and enhance cleaning performance. This ensures that dishes and cutlery come out sparkling clean while reducing the need for pre-rinsing. The appliance also features a delay start option, allowing users to set it to begin washing at a more convenient time, which is especially useful for taking advantage of off-peak energy rates.

Moreover, the Zanussi ZDS 300 is committed to user-friendly operation. The intuitive control panel is straightforward, providing clear options and settings that make programming the dishwasher effortless. The integrated design allows it to blend seamlessly with your kitchen cabinetry, maintaining a sleek and modern aesthetic.

Lastly, the dishwasher is designed to last, with high-quality materials and construction ensuring durability over time. With the Zanussi ZDS 300, households can expect a reliable and efficient cleaning solution that simplifies the dishwashing process and enhances overall kitchen efficiency. Whether you have a small family or entertain guests frequently, this dishwasher is an exceptional choice that balances performance with practicality.
Top Page Image Contents