Zanussi ZDS 300 Installation instructions, Fitting under a counter, Levelling, Proceed as follows

Page 4

Installation instructions

Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

Fitting under a counter

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

570-

600

820

450

IN04

Proceed as follows:

Remove the machine’s worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed. During all operations that involve accessibility to internal components the dishwasher has to be unplugged.

Be sure that once the appliance has been installed, it is easily accessible for the consumer service department.

If the dishwasher is later used as a free-standing appliance, the original worktop must be re-mounted.

The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of the door.

When the appliance is correctly levelled, the door will not catch on either side of the cabinet.

If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.

Water supply connections

This dishwasher may be fed with either hot (max. 60°) or cold water. Nevertheless we advise you a cold water supply.

A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot.

For making the connection itself, the coupling nut fitted to the machine’s supply hose is designed to screw onto a 3/4" inch gas thread spout or to a purpose made quick-coupling tap such as the Press-block.

The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when it is being connected up.

The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted

to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible).

If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used in another appliance.

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

Security system

Inlet hose

The inlet hose has a high pressure resistance. It can sustain pressures up to 6000 kPa (60 bar), 6 times a normal hose.

As a further safeness, the inlet hose is protected with a sheathing against eventual damages.

In case of breakage of the inner hose, the water that is in the hose will become dark, this is visible across the special transparent sheathing.

In this case turn off the water tap and call the Service Force Centre.

The inlet hose is fitted with a safety device to prevent inadvertent loosening.

To detach the hose, press the lever (B) and turn the retaining ring (A) anticlockwise.

A

B

CA14

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Dishwasher Contents Safety instructions InstallationChild safety DisposalInstallation instructions Fitting under a counterLevelling Water supply connectionsWater outlet hose connection Electrical connectionDescription of the appliance Control panelIndicator lights Activation/deactivation of the rinse aid dispenserPrior to using for the first time Setting manuallySetting electronically Water softenerAdjusting the dose Filling with dishwasher saltRinse aid Filling with rinse aidDaily use Loading cutlery and dishesLower basket Are of limited suitabilityAdjusting the height of the upper basket Cutlery basketUpper basket To move to the higher position proceed as followsUse of detergent Fill with detergentDifferent kinds of detergent Detergent tabletsConcentrated detergent Combi detergentsWashing programmes Starting a washing programme Maintenance and cleaning Cleaning the filtersFrost precautions Prolonged periods of non-operationFlashing fault code appears There are problems when operating the dishwasherFault code / malfunction Possible cause Solutions Malfunction Possible cause SolutionsService and spare parts Dishes are not cleanWash results are not satisfactory Dishes are wet and dullHints for test centres Cup racks position a01/05

ZDS 300 specifications

The Zanussi ZDS 300 is a stylish and efficient integrated dishwasher designed to meet the needs of modern households. With its blend of innovative features and practical design, this appliance ensures that dishwashing becomes a hassle-free task.

One of the standout features of the ZDS 300 is its energy efficiency. Rated with a high energy efficiency class, it ensures that users save on electricity bills while being environmentally conscious. The dishwasher operates quietly, making it suitable for open-plan living spaces. This is particularly important for families and individuals who value a serene home environment.

The ZDS 300 boasts a spacious interior that can accommodate a generous load of dishes. Its flexible racking system allows users to easily adjust the layout to fit larger pots and pans. This adaptability ensures that every load, no matter the size or shape of the items, is utilized effectively. In addition, the dishwasher is equipped with multiple wash programs tailored to various cleaning needs, from light cycles for delicate glassware to heavy-duty options for stubborn, baked-on stains.

Another technological advancement in the ZDS 300 is the advanced water filtration system, designed to eliminate impurities and enhance cleaning performance. This ensures that dishes and cutlery come out sparkling clean while reducing the need for pre-rinsing. The appliance also features a delay start option, allowing users to set it to begin washing at a more convenient time, which is especially useful for taking advantage of off-peak energy rates.

Moreover, the Zanussi ZDS 300 is committed to user-friendly operation. The intuitive control panel is straightforward, providing clear options and settings that make programming the dishwasher effortless. The integrated design allows it to blend seamlessly with your kitchen cabinetry, maintaining a sleek and modern aesthetic.

Lastly, the dishwasher is designed to last, with high-quality materials and construction ensuring durability over time. With the Zanussi ZDS 300, households can expect a reliable and efficient cleaning solution that simplifies the dishwashing process and enhances overall kitchen efficiency. Whether you have a small family or entertain guests frequently, this dishwasher is an exceptional choice that balances performance with practicality.
Top Page Image Contents