Zanussi ZGL62IT Operation, Helpful hints and tips, Ignition of the burner, Turning the burner off

Page 8

Operation

Ignition of the burner

Warning! Be very careful when you use open fire in

kitchen environment. Manufacturer decline any responsibility in case misuse of the flame

Always light the burner before you put cookware. To light the burner:

1.Turn the control knob counterclockwise to the maxi-

mum position ( ) and push it down.

2.Keep the control knob pushed for approximately 5 seconds; this will let thermocouple to warm up. If not, the gas supply will be interrupted.

3.Adjust the flame after it is regular.

If after some tries the burner does not light, check if the crown and its cap are in correct positions.

1

2

3

4

1Burner cap

2Burner crown

3Ignition candle

4Thermocouple

Warning! If the burner does not light after 15 seconds, release the control knob, turn it into off

position and try to light the burner again after minimum 1 minute.

Important! In the absence of electricity you can ignite the burner without electrical device; in this case approach the burner with a flame, push the relevant knob down and turn it counter-clockwise to maximum gas release position.

If the burner accidentally goes out, turn the control knob to the off position and try to light the burner

again after minimum 1 minute.

The spark generator can start automatically when you switch on the mains, after installation or a pow-

er cut. It is normal.

Turning the burner off

To put the flame out, turn the knob to the symbol .

Warning! Always turn the flame down or switch it off before you remove the pans of the burner.

Helpful hints and tips

Energy savings

•If possible, always put the lids on the pans.

•When the liquid starts to boil, turn down the flame to barely simmer the liquid.

Warning! Use pots and pans with bottom applicable to the dimension of burner.

Do not use cooking vessels on the hotplate that overlap its edges.

Burner

Diameters of cookware

Rapid

180 - 260 mm

8

 

Burner

Diameters of cookware

Semi-rapid

120 - 220 mm

Auxiliary

80 - 160 mm

Warning! Pots must not enter the control zone.

Warning! Make sure pot handles do not protrude over the front edge of the cooktop and that pots are

centrally positioned on the rings in order to achieve maximum stability and to obtain lower gas consumption.

Do not place unstable or deformed pots on the rings to prevent from spill and injury.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents ZGL62IT Contents Safety informationDisposal of the appliance Keep the minimum distances to other appliances and unitsTo prevent the risk of physical injury or damage Flat the external gas pipes if there are fittedInstallation Important safety requirementsGas Connection End of shaft with nut Washer ElbowElectrical connection Injectors replacementAdjustment of minimum level Replacement of the connection cable BuildingCooking surface layout Control knobs Product descriptionPossibilities for insertion Operation Helpful hints and tipsIgnition of the burner Turning the burner offCare and cleaning Cleaning of the spark plugPeriodic maintenance What to do if…Technical data Hob dimensions Labels supplied with the accessories bagHob recess dimensions Heat inputGas burners Environment concernsPackaging material Page Page Page 397155701-B-362010

ZGL62IT specifications

The Zanussi ZGL62IT is a versatile and efficient gas hob that brings contemporary design and high performance to your kitchen. With its sleek, stainless steel finish and sophisticated features, this appliance is not just functional; it also enhances the aesthetic appeal of any modern cooking space.

One of the standout features of the Zanussi ZGL62IT is its powerful burners. This hob is equipped with four gas burners of varying sizes, providing the flexibility needed to prepare multiple dishes simultaneously. The high-efficiency burner delivers rapid heat for boiling and frying, while the simmer burner allows for low-temperature cooking, making it perfect for sauces or delicate dishes. Each burner is designed to distribute heat evenly, ensuring consistent cooking results.

An essential technology in the Zanussi ZGL62IT is its automatic ignition system. This feature allows users to ignite burners easily with a simple push of a knob, eliminating the need for matches or lighters, and improving safety and convenience in the kitchen. The control knobs are located at the front, making them easily accessible while cooking, and they provide precise temperature control for each burner.

Safety is a top priority in the design of the Zanussi ZGL62IT. The hob is equipped with a flame failure device that automatically cuts the gas supply if the flame goes out, providing peace of mind while cooking. This safety feature combined with the robust construction ensures that the hob is not only reliable but also safe for everyday use.

Cleaning and maintenance are made easy with the Zanussi ZGL62IT. The removable cast iron pan supports provide stability for pots and pans while being easy to clean. The stainless steel surface is designed to resist stains and corrosion, allowing it to maintain its attractive appearance even with everyday use.

In terms of dimensions, the Zanussi ZGL62IT fits seamlessly into most kitchen layouts, making it an ideal choice for both small and large kitchens. Its modern design complements various kitchen styles, from contemporary to traditional.

Overall, the Zanussi ZGL62IT combines efficiency, safety, and style, making it a valuable addition to any home. With its robust features, ease of use, and sleek design, this gas hob is an excellent choice for anyone looking to enhance their cooking experience. Whether you are a novice cook or an experienced chef, the Zanussi ZGL62IT can cater to your culinary needs with finesse and reliability.
Top Page Image Contents