Panasonic DP-6530 manual Exiting Copy Papers, When Coming Across the Situations below

6	Once the final original has been scanned, press the FINISHED key.
	- When the reversing automatic document feeder is used, and the single-feed mode is selected,
	the procedure is slightly different from the above. Procedure of using the single-feed mode		2
	Page 5-3
	- After starting copying, press the JOB STATUS	key on the control panel, then press the
	STATUS key on the touch panel to indicate which drawer is in use. When paper runs out
	of each drawer, the empty drawer will flash.

Exiting Copy Papers

The paper exits with its printed side down except in the following cases.

When paper is exited with its printed side up:

-When ‘Non-sort / Non-staple’ mode is selected for setting the original on the original glass.

-When the paper size is not set for bypass copying.

When Coming Across the Situations below

To make multiple sets of copies: - Key in the copy quantity.

- To correct the input copy quantity, press the CLEAR key.

When the paper has run out in the middle of copying:

JOB STATUS key flashes. Press this key to check which drawer is flashing and add papers.

To stop a copy operation Page 2-15

When this message appears “Wait ”:

The machine may automatically go into the adjustment mode. It will soon start working. Do not turn OFF the power. Just wait for a while.

2-3