1
2
3
4
5
6
7
8
9
10
11
12
6-8 SELECTING FINISHING MODES
2Place the original(s). Page 2-9
3Press the key on the basic screen as shown on the
right (shaded).
4Press the HOLE PUNCH key.
- If the desired function keys are not displayed, press the
Next key to change the menu screen.
5. HOLE PUNCH MODE (OPTIONAL)
1Place paper in the drawer(s). Page 2-4
- When using this mode in bypass copying ( Page 5-8), be
sure to specify the paper size.
With the optional hole punch unit (DA-SP81) attached to the optional finisher (DA-FS810/FS815), you
can have your copies punched with holes.
* The paper weight should be in the range of 17 lb. Bond - 140 lb. Index. Special paper such as OHP
films or labels is excluded.
You can have the tab paper punched with hole by the User Selection ( Page 5-19).
Select other copy modes as required.
5Press the START key.
Number of punch holes and available paper sizes:
Since the number of punch holes and the distance between
the holes vary depending on the country, purchase a hole
punch unit that meets your requirements. (For details, consult
your service technician.)
Number of punch holes and hole diameter
2/3 holes switchable
(0.315” dia.)
Available paper sizes
2 holes: LG, LT-R
3 holes: LD, LT, A3, A4