Panasonic DP-6530 manual ADD Paper Symbol, Adding Paper to the Tandem LCF Large Capacity Feeder

2. ADD PAPER SYMBOL (Cont.)

Adding Paper to the Tandem LCF (Large Capacity Feeder)

1 Pull the tandem LCF out carefully until it comes to a stop.

- Be careful not to touch the drawer slide rail.

2 Open some packages of paper, take out entire reams of paper and set them aligned in tray A and tray B .

-When setting the paper, set the paper for A to the right side, and set it for B to the left side. (The paper can be

set neatly if you pile it up gradually and alternately in trays

	A and B .) Be sure that the center lever is not open (refer
	to the labels attached in the tandem LCF ).
	- Up to 2500 sheets of paper (20 lb Bond) can be set.
	- Paper starts being fed from the elevator tray A at first,
	and when it runs out of paper, the paper on tray B moves
	to the position A .
	- Set the paper so that it does not protrude beyond the line
	of indication shown on the rear guide plate.
	- Do not use creased, folded, wrinkled or damp sheets of
7	paper.
	- Be careful not to touch the drawer slide rail.
3	Close the cover of the tandem LCF.
	- Close the drawer completely. The elevator tray automatically
	moves up to the paper feeding position.

A

B

MAX

Slide Rail

Be careful not to let your fingers be caught when closing the drawer.

7-4 WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL