Place the paper on the elevator tray | Panasonic DP-6530 specs

Adding Paper to the External LCF (Large Capacity Feeder) (optional)

1 Pull the external LCF out carefully until it comes to a stop.

- Be careful not to touch the drawer slide rail.

2	Place the paper on the elevator tray.
2	- Place the paper face up.
	- Maximum number of sheets that can be set	Page 2-4

- Fan the paper well, then place it on the elevator tray, aligning it on the rear guide tray.

- Set the paper so that it does not protrude beyond the line of indication shown on the rear guide plate.

- Do not use creased, folded, wrinkled or damp sheets of paper.

Do not touch the Elevator Tray while it is moving.

Slide Rail

MAX

Elevator Tray

3	Close the cover of the external LCF.	7
3	- Close the cover completely. The elevator tray automatically

moves up to the paper feeding position.

Be careful not to let your fingers be caught when closing the drawer.

7-5

Image 133

Panasonic DP-6530 manual Place the paper on the elevator tray, Close the cover of the external LCF

Contents

Operating Instructions FCC Notice Use of Recycled Paper in the Machine Off Mode Default Time Off ModeAutomatic Energy Save Default Time Automatic Energy Save Preface User Safety Preface Features of the DP-6530/8130 Table of Contents Table of Contents Maintenance Disclaimer Notice Installation Precautions General Precautions PrecautionsBe sure to disconnect the power-cord plug Handle and use the machine gently and carefully High Temperature Warning Areas Fixing the adjusters stoppers Page Before Making Copies Back Side of the Control Panel Main Components Optional Equipment Optional Equipment ConfigurationHole punch unit DA-SP81 External LCF Large Capacity Feeder DA-MA810 Control Panel Function Clear key Timer LampStop key Start key Message Display Touch PanelTouch-keys Clearing the Functions Selected Settings set functions confirmation key Turning on the Power Switch/Auto Job Start Turning on the Power SwitchTurning on the Power Switch Turn on the power switch When Ready appears, the machine is ready for copying After Copying is Finished Controlling the Use of the Machine with Department CodesPage HOW to Make Copies General Copying Procedures Exiting Copy Papers When Coming Across the Situations below Acceptable Copy Paper Types and Sizes Setting Copy PaperFeeder Paper Type Paper Size Remarks Pay attention to the following points Handling and Storing Paper Setting Copy Paper Setting the Drawer for Special Uses If you want to select the Cover , Insert or TAB Paper Acceptable Original Types and Sizes Setting Originals When Placing an Original on the Glass Setting Originals Exiting Originals When Using the Reversing Automatic Document Feeder After aligning the edges of originals well, place Continuous Feed ModeOriginals Them face up and align the slides to the width Confirming and Cancelling Auto Job Start Auto JOB Start JOB PresetPlace the originals. Confirming auto job start Press the Interrupt key Interrupt CopyingReplace the original with a new one. Interrupt key again Stopping the Copy Operation Deleting the Job Deleting or Changing Order of Pending Jobs Changing order is completed 18HOW to Make Copies Setting of Basic Copy Modes Automatic Paper Selection APS Paper Selection Manual Paper Selection Press the AMS key Reduction and Enlargement Copying Press the key corresponding to the original size Paper size, then press the ZOOM···· key Reduction and Enlargement CopyingPress the drawer icon representing the desired copy Duplex Copying 1-SIDED, 2-SIDED, BOOK-TYPE Duplex Copying 1-SIDED, 2-SIDED, BOOK-TYPE Follow the same procedure 1 to 3 as shown aboveBook-Type Originals 2-Sided Copies Select LT copy size Press the Book 2 key Select the book copying type 10SETTING of Basic Copy Modes Copy Density Adjustment Manual Copy Density Mode Copy Density AdjustmentPress Auto on the basic screen Selecting Original Mode Quick Access Menu Using the Editing Functions Providing Right or Left Margin Image Shift Press the Start key Providing a Bookbinding Margin Edge Erase Press the 1 Side Or 2 Side key DUAL-PAGESelect the 1 Side Turn to the next page, set the book again DualScanned Press the lower SET key Y Zoom Trimming/Masking Image Editing Press the lower SET key Place the original. Sheet original Enter the distance values read in for the specified area Mirror Image Image Editing Negative/Positive Reversal 4IN1 2IN1 Select the type of the original Select the type of image combinationPlace the originals Key Copying with Annotation Numbering Copying Magazine Sort from the Editing Menu Adjust the binding margin and press the SET key TOP Copied Back Blank Cover Copying 7Press the Start key Setting Tab Paper in the Drawer Pull the second drawer out TAB Paper Mode Tab Width Adjustment Key, then adjust the tab extension tab width TAB Paper ModeShift width then press the SET key Place tab paper in the drawer or the bypass guide Tab Paper CopyingPress the Copy on TAB key Press the SET key Press the TAB Paper key Tab Paper Insertion Place tab paper in the drawer or the bypass guide Tab Paper Insertion and Copying Document Storage Press the Start key Overlay Entering letters. Page 5-29 Max characters Press the Overlay key OverlayPress the Start key Confirming Overlay Test Print Press the Start key Cancelling the Sharpness Adjustment Sharpness AdjustmentPress the Soft or Sharp key Direction of Duplex Copy Images Rotation Using Special Functions Continuous Original Feeding / Single Original Feeding Copying begins MIXED-SIZED Originals JOB Memory Storing a Combination of Copy Job Settings JOB Memory Confirming Stored Copy Jobs Bypass copying Bypass Copying Press the Start key Bypass Copying on Standard Size Paper Bypass CopyingPerform steps 1 to 2 on pages 5-8 Set the Other size key as necessary. Bypass Copying on Non-Standard Size Paper Storing a Non-Standard Size in the Memory Key in each dimension, then press the Memory key Set the ON/OFF times for each day of the week Weekly Timer Setting the Other Size KEY Check that the settings are all correct Setting the Date and TimeSetting the Clock fore Daylight Saving Time Clearing the Automatic Energy Saving Mode Setting the Automatic Energy Save ModeAllowed before the Automatic Energy Saving mode is Activated Clearing the Off-Mode/Sleep Mode Setting the Automatic OFF-MODE Press the key of the desired language Switching Languages User Selection Initial settings Department Codes Master code name is displayed in the department number Input the master code name, and press the SET key Registration / Change / Deletion of Department Code Department Codes Entering letters 24USING the Special Functions Entering letters Page 5-29 Max characters Page Counter reset is completed Print out Department Code Entering Letters Entering Letters Entering Letters Page 32USING the Special Functions Selecting Finishing Modes Names of the Main Components Finishing Modes and Finishers Optional Press the Sort or Group key SORT/GROUP Copying Staple Sorting Optional Maximum Number of Sheets that can be Stapled DA-FS810/FS815 Magazine Sort & Saddle Stitch Mode Booklet Mode Available Conditions for Saddle Stitch Press Start key Number of punch holes and available paper sizes Hole Punch Mode Optional When the Graphic Symbols Flash on the Touch Panel Description of the Flashing Graphic Symbols Adding Paper to the Drawers ADD Paper SymbolPull the drawer out carefully until it comes to a stop Place the paper in the drawer Adding Paper to the Tandem LCF Large Capacity Feeder ADD Paper SymbolPull the tandem LCF out carefully until it comes to a stop Close the cover of the tandem LCF Close the cover of the external LCF Place the paper on the elevator tray Open the front cover Replace Toner Bottle Symbol Shake the new toner bottle well to loosen the toner inside Additional Explanation Replace Toner Bottle SymbolDispose of Used Toner Replace Toner Bag Clear Paper Symbol Clear Paper Symbol Lift the blue handle second as shown on the right Remove any misfed paper Open the bypass cover Remove any misfed paper Open the exit coverTurn the handle in the direction of the arrow Lift the grip, then turn the knob in the direction Pull the transfer unit out until it comes to a stopArrow to remove any misfed paper 11Remove any misfed paper Blue knob Paper Misfeed in the Hole Punch Unit Optional Return the external LCF to its original position Knob 18WHEN the Graphic Symbols Flash on the Touch Panel Page Adding Staples Optional Close the front cover of the finisher Adding Staples Optional Saddle Stitch Unit Page Removing Jammed Staples Optional Return the staple case to its original position Removing Jammed Staples Optional Disposing of Accumulated Punched Paper Bits Optional Call Service Symbol / Periodic Maintenance Message Maintenance Power switch ON/OFF status Weekly MaintenanceDaily Inspection Items for Daily Check Display does not change when keys or icons are pressed Simple TroubleshootingMachine does not start Copy density is too low Copy density is too high Simple TroubleshootingCopies are stained Copy images are blurred Specifications Options OPC DP-6530/8130 Specifications Continuous Copying Speed Finishers Specifications of OptionsTray Loading Capacity External LCF Large Capacity Feeder Hole Punch Unit Packing List Numbers Index Index When Using the Reversing Automatic Document Memo Page USA Only