Panasonic DP-6530 manual General Copying Procedures

1. GENERAL COPYING PROCEDURES

After placing, or confirming that there is, paper in the drawers, place the originals. When the START key is pressed with any settings unchanged, copies are made in the initial (default) settings *1. You can make copies as desired by setting different copy modes.

The initial (default) settings of the machine at the time of installation are as shown below.

2 *1 The copy modes that are automatically set when the power is turned on, when the energy-saving mode is cleared or when the FUNCTION CLEAR key is pressed on the control panel are called the initial (default) settings.

Initial (default) settings

Reproduction ratio. ...100% Automatic paper selection Auto image density Non-sort Non-staple mode

Copy quantity ......1

1-sided copies from 1-sided originals Standard mode (original image type) Continuous original feed mode

Copying Procedure

1	Place paper in the drawer(s). - Acceptable copy paper					Page 2-4
	When the desired paper is not placed in any of the drawers or the large capacity feeder :
	- Setting the drawer		Page 2-6	- Bypass copying		Page 5-8
2	Place the original(s).
	- Acceptable originals	Page 2-9 - When placing an original on the glass					Page 2-10
	- When using the reversing automatic document feeder				Page 2-11
3	Select the copy modes (		in the illustration on the page on the right).
	- Use the touch panel and the digital keys.
	- Selecting multiple copy modes may be restricted depending on their combination.
	- Copy modes cannot be changed after the START					key is pressed (including the case
	when originals are divided into multiple sets when fed).
4	Press the START key (		in the illustration on the page on the right).
	- When the reversing automatic document feeder is used and
	the continuous feed mode is selected (			Page 5-2), copying begins.

5 Place the next original (2nd side) and press the START key.

-Set the first page of your originals first.

-You can also press the YES key before pressing the

START key to perform the same operation. (See the comment on the right)

-Repeat this step for the subsequent originals.

•The above display will not appear for Single-sided copying when Non-Sort or Non-Staple is selected.

2-2HOW TO MAKE COPIES