2. EDGE ERASE

If your original has a dirty or torn edge, it may be reproduced as a black mark on the copy. In that case, use Edge Erase Copying. A white border is created along the edges of the copy, eliminating those black marks.

* This function is available in only case of the standard-size original.

4

1

Place paper in the drawer(s).

Page 2-4

- When using this mode in bypass copying, be sure to specify

 

the paper size.

Page 5 -10, 5 -11

 

2 Place the original(s). Page 2-9

3 Press the EDIT key to enter the edit menu, and press the EDGE ERASE key.

4 Adjust the width of the white border, then press the SET key.

-The default width of the white border is 5 mm (0.197”).

-To adjust the width, press the 5mm or 20mm key to select the desired number, then press the SET key.

*25.4mm = 1”

Select other copy modes as required.

5 Press the START key.

4-4

USING THE EDITING FUNCTIONS

Page 60
Image 60
Panasonic DP-6530 manual Edge Erase, Press the Start key