PREFACE
Thank you for purchasing the digital imaging system
This Operating Instructions describes the following:
•how to use the digital Digital Imaging System
•how to inspect and carry out maintenance on the digital Digital Imaging System
•how to remedy mechanical and copying problems
Before using the Digital Imaging System, thoroughly read and understand this Operating Instructions. To ensure that clean copies are made at all times and to keep your Digital Imaging System in optimum working order, this Operating Instructions should be readily available for future reference.
To ensure correct and safe use of the Digital Imaging System
Before reading this Operating Instructions, you should fully understand the meaning and importance of these signal words.
Warning . Indicates a potentially hazardous situation which, if not avoided, could result in death, serious injury, or serious damage, or fire in the equipment or surrounding assets.
Caution .. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury, partial damage of the equipment or surrounding assets, or loss of data.
Note ....... Indicates a procedure you should follow to ensure the optimal performance of the digital
imaging system and
Tip .......... Describes handy information that is useful to know when operating the digital imaging system.
Advice .... Describes an operation you should follow to keep the digital imaging system in good
working order.
User Safety
This digital imaging system does not produce laser radiation hazardous to the user. It is certified as a Class 1 laser product under the U.S. Department of Health and Human Services (DHHS) Radiation Performance Standard according to the Radiation Control for Health and Safety Act of 1968.
Protective housing and external covers completely confine the laser light emitted inside the machine. The laser beam cannot escape from the machine during any phase of user operation.
Regulations implemented on August 2, 1976 by the Bureau of Radiological Health (BRH) of the U.S. Food and Drug Administration apply to laser products manufactured from August 1, 1976. Laser products marketed in the United States must comply with these regulations.
CAUTION: Using controls or adjustments or performing procedures, other than those specified herein may result in hazardous radiation exposure.
2
