Press Start key | Panasonic DP-6530 specification

4 Press the key on the basic screen as shown on the right (shaded).

5 Press the MAGAZINE SORT ( or MAGAZINE SORT & SADDLE STITCH or SADDLE STITCH ) key.

-If the desired function keys are not displayed, press the Next key to change the menu screen.

		Select other copy modes as required.		6
	6	Press the	START key.

		When placing original(s) on the glass, perform steps 5 to 6
		on page 2-2 to 2-3.

Available Conditions for Saddle Stitch

When paper of different weights is loaded, the maximum number of sheets that can be stapled will be that of the paper with the highest weight.

Paper size	Paper weight	Maximum capacity for saddle stitch	Tray load capacity

LD	20 lb Bond	10 sheets	Copying of 11-15 sheets: 10 copies
(Ledger)	(Plain paper)		Copying of 6	-10 sheets: 20 copies
LT-R			Copying of 5 sheets or less: 25 copies

(Letter-R)	24 lb Bond	10 sheets	Copying of 11-15 sheets: 10 copies
	(Thick 1)		Copying of 6	-10 sheets: 20 copies
			Copying of 5 sheets or less: 25 copies

	28 lb Bond	10 sheets	Copying of 6	- 8 sheets: 15 copies
	(Thick 1)		Copying of 5 sheets or less: 25 copies

When the tray load capacity is exceeded, automatically switching to magazine sort mode.

6-7

Image 127

Panasonic DP-6530 manual Press Start key, Available Conditions for Saddle Stitch

Contents

Operating Instructions FCC Notice Use of Recycled Paper in the Machine Automatic Energy Save Off ModeOff Mode Default Time Automatic Energy Save Default Time Preface User Safety Preface Features of the DP-6530/8130 Table of Contents Table of Contents Maintenance Disclaimer Notice Installation Precautions Handle and use the machine gently and carefully PrecautionsGeneral Precautions Be sure to disconnect the power-cord plug High Temperature Warning Areas Fixing the adjusters stoppers Page Before Making Copies Back Side of the Control Panel Main Components External LCF Large Capacity Feeder DA-MA810 Optional Equipment ConfigurationOptional Equipment Hole punch unit DA-SP81 Control Panel Start key Timer LampFunction Clear key Stop key Message Display Touch PanelTouch-keys Clearing the Functions Selected Settings set functions confirmation key When Ready appears, the machine is ready for copying Turning on the Power SwitchTurning on the Power Switch/Auto Job Start Turning on the Power Switch Turn on the power switch After Copying is Finished Controlling the Use of the Machine with Department CodesPage HOW to Make Copies General Copying Procedures Exiting Copy Papers When Coming Across the Situations below Acceptable Copy Paper Types and Sizes Setting Copy PaperFeeder Paper Type Paper Size Remarks Pay attention to the following points Handling and Storing Paper Setting Copy Paper Setting the Drawer for Special Uses If you want to select the Cover , Insert or TAB Paper Acceptable Original Types and Sizes Setting Originals When Placing an Original on the Glass Setting Originals Exiting Originals When Using the Reversing Automatic Document Feeder Them face up and align the slides to the width Continuous Feed ModeAfter aligning the edges of originals well, place Originals Confirming auto job start Auto JOB Start JOB PresetConfirming and Cancelling Auto Job Start Place the originals. Interrupt key again Interrupt CopyingPress the Interrupt key Replace the original with a new one. Stopping the Copy Operation Deleting the Job Deleting or Changing Order of Pending Jobs Changing order is completed 18HOW to Make Copies Setting of Basic Copy Modes Automatic Paper Selection APS Paper Selection Manual Paper Selection Press the AMS key Reduction and Enlargement Copying Press the key corresponding to the original size Paper size, then press the ZOOM···· key Reduction and Enlargement CopyingPress the drawer icon representing the desired copy Duplex Copying 1-SIDED, 2-SIDED, BOOK-TYPE Duplex Copying 1-SIDED, 2-SIDED, BOOK-TYPE Follow the same procedure 1 to 3 as shown aboveBook-Type Originals 2-Sided Copies Select LT copy size Press the Book 2 key Select the book copying type 10SETTING of Basic Copy Modes Copy Density Adjustment Manual Copy Density Mode Copy Density AdjustmentPress Auto on the basic screen Selecting Original Mode Quick Access Menu Using the Editing Functions Providing Right or Left Margin Image Shift Press the Start key Providing a Bookbinding Margin Edge Erase Press the 1 Side Or 2 Side key DUAL-PAGESelect the 1 Side Turn to the next page, set the book again DualScanned Press the lower SET key Y Zoom Trimming/Masking Image Editing Press the lower SET key Place the original. Sheet original Enter the distance values read in for the specified area Mirror Image Image Editing Negative/Positive Reversal 4IN1 2IN1 Key Select the type of image combinationSelect the type of the original Place the originals Copying with Annotation Numbering Copying Magazine Sort from the Editing Menu Adjust the binding margin and press the SET key TOP Copied Back Blank Cover Copying 7Press the Start key Setting Tab Paper in the Drawer Pull the second drawer out TAB Paper Mode Tab Width Adjustment Key, then adjust the tab extension tab width TAB Paper ModeShift width then press the SET key Place tab paper in the drawer or the bypass guide Tab Paper CopyingPress the Copy on TAB key Press the SET key Press the TAB Paper key Tab Paper Insertion Place tab paper in the drawer or the bypass guide Tab Paper Insertion and Copying Document Storage Press the Start key Overlay Entering letters. Page 5-29 Max characters Press the Overlay key OverlayPress the Start key Confirming Overlay Test Print Press the Start key Cancelling the Sharpness Adjustment Sharpness AdjustmentPress the Soft or Sharp key Direction of Duplex Copy Images Rotation Using Special Functions Continuous Original Feeding / Single Original Feeding Copying begins MIXED-SIZED Originals JOB Memory Storing a Combination of Copy Job Settings JOB Memory Confirming Stored Copy Jobs Bypass copying Bypass Copying Press the Start key Set the Other size key as necessary. Bypass CopyingBypass Copying on Standard Size Paper Perform steps 1 to 2 on pages 5-8 Bypass Copying on Non-Standard Size Paper Storing a Non-Standard Size in the Memory Key in each dimension, then press the Memory key Set the ON/OFF times for each day of the week Weekly Timer Setting the Other Size KEY Check that the settings are all correct Setting the Date and TimeSetting the Clock fore Daylight Saving Time Activated Setting the Automatic Energy Save ModeClearing the Automatic Energy Saving Mode Allowed before the Automatic Energy Saving mode is Clearing the Off-Mode/Sleep Mode Setting the Automatic OFF-MODE Press the key of the desired language Switching Languages User Selection Initial settings Department Codes Master code name is displayed in the department number Input the master code name, and press the SET key Registration / Change / Deletion of Department Code Department Codes Entering letters 24USING the Special Functions Entering letters Page 5-29 Max characters Page Counter reset is completed Print out Department Code Entering Letters Entering Letters Entering Letters Page 32USING the Special Functions Selecting Finishing Modes Names of the Main Components Finishing Modes and Finishers Optional Press the Sort or Group key SORT/GROUP Copying Staple Sorting Optional Maximum Number of Sheets that can be Stapled DA-FS810/FS815 Magazine Sort & Saddle Stitch Mode Booklet Mode Available Conditions for Saddle Stitch Press Start key Number of punch holes and available paper sizes Hole Punch Mode Optional When the Graphic Symbols Flash on the Touch Panel Description of the Flashing Graphic Symbols Place the paper in the drawer ADD Paper SymbolAdding Paper to the Drawers Pull the drawer out carefully until it comes to a stop Close the cover of the tandem LCF ADD Paper SymbolAdding Paper to the Tandem LCF Large Capacity Feeder Pull the tandem LCF out carefully until it comes to a stop Close the cover of the external LCF Place the paper on the elevator tray Open the front cover Replace Toner Bottle Symbol Shake the new toner bottle well to loosen the toner inside Replace Toner Bag Replace Toner Bottle SymbolAdditional Explanation Dispose of Used Toner Clear Paper Symbol Clear Paper Symbol Lift the blue handle second as shown on the right Remove any misfed paper Open the bypass cover Remove any misfed paper Open the exit coverTurn the handle in the direction of the arrow 11Remove any misfed paper Pull the transfer unit out until it comes to a stopLift the grip, then turn the knob in the direction Arrow to remove any misfed paper Blue knob Paper Misfeed in the Hole Punch Unit Optional Return the external LCF to its original position Knob 18WHEN the Graphic Symbols Flash on the Touch Panel Page Adding Staples Optional Close the front cover of the finisher Adding Staples Optional Saddle Stitch Unit Page Removing Jammed Staples Optional Return the staple case to its original position Removing Jammed Staples Optional Disposing of Accumulated Punched Paper Bits Optional Call Service Symbol / Periodic Maintenance Message Maintenance Items for Daily Check Weekly MaintenancePower switch ON/OFF status Daily Inspection Copy density is too low Simple TroubleshootingDisplay does not change when keys or icons are pressed Machine does not start Copy images are blurred Simple TroubleshootingCopy density is too high Copies are stained Specifications Options OPC DP-6530/8130 Specifications Continuous Copying Speed Finishers Specifications of OptionsTray Loading Capacity External LCF Large Capacity Feeder Hole Punch Unit Packing List Numbers Index Index When Using the Reversing Automatic Document Memo Page USA Only