Sound Performance Lab 9629 manual Manual, Auto Dynamic De-Esser Modell

Page 2

Manual

Auto Dynamic De-Esser Modell 9629

Version 4.0 – 5/2000

R&D:Wolfgang Neumann

Written by Hermann Gier & Paul White

The information in this document has been carefully verified and is assumed to be correct. However Sound Performance Laboratory (SPL) reserves the right to modify the product described in this manual at any time. Changes without notice. This document is the property of SPL and may not be copied or reproduced in any manner, in part or full without the authorization of SPL.

Limitations of Liability:

In no event will SPL be liable for any damages, including loss of data, lost profits, cost of cover or other special, incidental, consequential or indirect damages arising from the use of the unit, however caused and on any theory of liability. This limitation will apply even if SPL or an authorized dealer has been advised of the possibility of such damage.

Sound Performance Lab

P.O. Box 12 27

D- 41368 Niederkrüchten, Germany

Tel +49-2163-98340

Fax +49-2163-983420

E-Mail: info@soundperformancelab.com

www.soundperformancelab.com

© 2000 SPL electronics GmbH. All rights reserved. Subject to change without notice.

2

Image 2
Contents Manual Manual Auto Dynamic De-Esser ModellContents ForewordHow do traditional De-Essers work? Installation & Security AdvicesIntroduction How does SPL’s Auto Dynamic De-Esser work?Connections Rear panelControl Elements Reduction Auto-ThresholdPower Supply Male/FemaleDimensions SpecificationsPower Supply Input & OutputWarranty