Electrical connections, Permanent Connection

Fitting the Hob into the worktop

Carry out the building in of the hob as follows:

Φ• put the seals supplied with the hob, on the edges of the cut out: place them exactly on the front and rear edge and at 50 mm. from the side edges, taking care that the seals meet without overlapping;

•place the hob in the cut out, taking care that it is centred;

•fix the hob with the relevant fixing clamps and screws, as shown in the diagram. When the screws have been tightened, the excess seal can be removed.

The edge of the hob forms a double seal which prevents the ingress of liquids.

FO 0199

a) Sealing gasket

Electrical connections

Any electrical work required to install this hob should be carried out by a qualified electrician or competent person, in accordance with the current regulations.

THIS HOB MUST BE EARTHED.

The manufacturer declines any liability should these safety measures not be observed.

This hob is designed to be connected to a 230-240V 50Hz AC electrical supply.

Before switching on, make sure the electricity supply voltage is the same as that indicated on the hob rating plate. The rating plate is located on the bottom of the hob. A copy is attached on the back cover of this book.

The hob is supplied with a 3 core flexible supply cord incorporating a 3amp plug fitted. In the event of having to change the fuse, a 3amp ASTA approved (BS 1362) fuse must be used.

Should the plug need to be replaced for any reason, the wires in the mains lead are coloured in accordance with the following code:

Green and Yellow - Earth

Blue- Neutral

Brown- Live

Φ— Connect the green and yellow (earth) wire to the terminal in the plug which is marked with

the letter 'E' or the earth symbolor coloured green and yellow.

—Connect the blue (neutral) wire to the terminal in the plug which is marked with the letter 'N' or coloured black.

—Connect the brown (live) wire to the terminal in the plug which is marked with the letter 'L' or coloured red.

Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.

A cut off plug inserted into a 13 amp socket is a seriuos safety (shock) hazard. Ensure that the cut off plug is disposed of safely.

Permanent Connection

In the case of a permanent connection, it is necessary that you install a double pole switch between the hob and the electricity supply (mains), with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current electric regulations.

The switch must not break the yellow and green earth cable at any point.

Ensure that the hob supply cord does not come into contact with surfaces with temperatures higher than 50 deg. C.

FO 0390

ZGL 62 specifications

The Zanussi ZGL 62 is a versatile and efficient gas hob that exemplifies contemporary kitchen design and functionality. Renowned for its sleek aesthetics and robust performance, this appliance caters to the needs of both amateur cooks and seasoned chefs alike.

One of the standout features of the Zanussi ZGL 62 is its five gas burners, providing a range of cooking options to suit various culinary tasks. The burners come in different sizes, allowing for optimal heat distribution whether you are boiling, simmering, or frying. This flexibility enables users to prepare multiple dishes at once, making it an excellent choice for families or those who enjoy entertaining guests.

The hob is equipped with a powerful wok burner, designed to deliver high heat for quickly searing and stir-frying. This feature is particularly valuable for Asian cooking, where rapid heat is essential for maintaining the flavors and textures of ingredients. Additionally, the adjustable flame settings on all burners allow for precise control, ensuring that every meal is cooked to perfection.

Safety is a paramount concern in any kitchen, and the Zanussi ZGL 62 addresses this with built-in flame failure devices. This technology ensures that the gas supply is automatically cut off if the flame goes out, providing peace of mind during cooking. Moreover, the appliance features easy-to-use controls, with ergonomic knobs that provide a firm grip, enhancing user experience.

The hob is designed with a durable glass-ceramic surface that not only enhances its aesthetic appeal but also simplifies cleaning. This material is resistant to scratches and stains, making it easy to maintain its pristine look after cooking. The surface is also designed to withstand the rigors of everyday use, ensuring longevity.

Installation is straightforward, thanks to the appliance’s standard dimensions and compatibility with most kitchen setups. The Zanussi ZGL 62 is energy-efficient, contributing to lower energy bills while still delivering optimal cooking performance.

In summary, the Zanussi ZGL 62 offers a blend of style, safety, and efficiency. With its powerful burners, user-friendly features, and elegant design, it is a perfect addition to any modern kitchen, enabling cooks to unleash their creativity without compromising on safety or performance. Whether you are simmering a sauce or searing meat, this hob provides the versatility needed for a wide array of cooking styles.