Oven lamp
•Disconnect the appliance from the power supply before the replacement of the oven lamp. There is the risk of electrical shock!
Service centre
•Only an approved engineer can repair or work on the appliance. Contact an approved service centre.
•Use only original spare parts.
Product description
Disposal of the appliance
•To prevent the risk of physical injury or damage
–Disconnect the appliance from the power supply.
–Cut off the mains cable and discard it.
–Discard the door catch. This prevents children or small animals from being closed inside of the ap- pliance. There is the risk of suffocation.
General overview
2 |
| 3 |
| 4 |
1
5
6
7
8 9 
Oven accessories
•Oven shelf
For cookware, cake tins, roasts.
•Deep roasting pan
Before first use
1Control panel
2Temperature indicator
3Temperature control knob
4Oven function control knob
5Air vents for the cooling fan
6Grill
7Oven lamp
8Fan
9Rating plate
To bake and roast or as pan to collect fat.
•The roasting pan grid
To put in the deep roasting pan.
Warning! Refer to "Safety information" chapter.
Preheating
1.Set function 
and maximum temperature.
2.Run an empty oven for 45 minutes.
3.Set function 
and maximum temperature.
4.Run an empty oven for 15 minutes.
This is to burn off any residue from the cavity surface. Accessories can become more hot than in normal use.
4
During this period an odour and smoke can be emitted. This is normal. Make sure the airflow is sufficient.
Initial Cleaning
•Remove all parts from the appliance.
•Clean the appliance before first use.
Caution! Do not use abrasive cleaning agents! This can damage the surface. Refer to chapter "Care and
Cleaning".