Door Reversal
1.Close the cabinet and pull out the plug from the electrical outlet.
2.Remove the ventilation grille. There is a part on the grille that can be removed. Remove it and transfer to the opposite side.
3.Support the cabinet on a wooden block when it is laid down. It will be easier to grip under the cabinet when resupporting to an upright positon.
4.On the upper part of the cabinet. Put the hinge pin on the other side.
5.On the lower part of the cabinet. Unscrew the hinge. Move the hinge pin and plastic cover. Secure the hinge on the other side.
Raise the cabinet and replace the ventilation grille.
6.Unscrew the handle. Carefully press in the plastic plugs on the opposite side using a punch. Secure the handle in the plug holes. Then press the supplied plastic plugs into the holes to which the handle was previously fitted.
7.Put the cabinet in position. Check that it stands straight. See the section ”Positioning the cabinet”.
2 |
3 |
4 |
6 |
15 | Zanussi 818 15 |