Zanussi ZV 45 RAL manual Door Reversal

Page 15

Door Reversal

Before carrying out the operations described below, pull out the mains plug from the wall socket.

To carry out this reversal go through the following steps:

1.Gently lay the appliance on its back with the top held away from the floor by 5-8 cm (2-3 inches) of packing.

2.Remove the bottom door hinge (5).

3.Remove the door (4) by opening it and pulling it gently downwards to remove it from the top hinge pin (2).

4.Unscrew the top hinge pin (2) from the top hinge (1) and replace it in the opposite hole on the left hand side.

5.Unscrew the foot at the base (6) of the appliance and refit it on the opposite side.

6.Refit the door and the bottom hinge to the left hand side.

When the bottom hinge is screwed in, a certain amount of force is exerted on the screws.

It is therefore advisable to lubricate the screw tips before starting this operation.

Important

After completion of the door reversal opera- tion, verify that the door gasket is sealing onto the cabinet.

15

Image 15
Contents Freezer Contents Important Safety Instructions Description of the Appliance Operation Normal Operating Sounds Frozen food storageThawing Ice makingHealth and Safety Guidelines Fruits & Vegetables if soft should be cooked and used up DefrostingWhen the appliance is not in use Maintenance and CleaningInternal cleaning External cleaningSomething not Working? Symptom SolutionService and Spare Parts Customer Care Department08705 Exclusions Guarantee ConditionsStandard guarantee conditions European GuaranteeTechnical specifications InstallationPositioning Green and Yellow Earth Blue Neutral Brown Live Electrical ConnectionDoor Reversal