Zanussi ZI 8454 X manual Building the appliance, Fitting the plinth

Page 18

Building the appliance in

¥Fit the appliance into the recess.

¥Fix it to the wall with the appropriate bracket.

¥The top of the appliance must be kept clear to allow correct air circulation. If a wall unit is fitted above the appliance, there must be a gap of 50 mm between this unit and the wall and it must be at least 50 mm below the ceiling.

Fitting the plinth

Alignment height of 820 mm

¥If using a 140 to 170 mm plinth, make a cut-out as shown.

¥If using a plinth higher than 100 mm but less than 140 mm, cut the height compensation strip supplied with the appliance to the required depth and fit it between the plinth and the ventilation grille, pressing it into position below this grille.

50

50

25

820
870
170
220
	140
30	190
100

140

190

18

Image 18

Contents FRIDGE-FREEZER Important Safety Information Contents Description of the Appliance Starting up Before usingOperation Electronic thermometerRefrigerator compartment Drinks dispenserSuperchill compartment Freezer compartmentThawing food Useful hints for freezingStoring frozen foods Ice cube makerMaintenance and Cleaning Periodic cleaningDefrosting of the refrigerator Periods of non operation Replacing the bulbsSymptom Solution Something not WorkingService and Spare Parts Customer Care Department7 0 5 9 2 9 9 2 Standard guarantee conditions European GuaranteeExclusions Technical Specifications Star RatingInstallation PositioningElectrical connections Green and Yellow Earth Blue- Neutral Brown- LiveHeight adjustment PositioningFitting the side panels Building the appliance Fitting the plinthAlignment height of 870 mm Electrolux Household Appliances Limited