Starting a washing programme

1.Check that the baskets have been loaded correctly and that the spray arms can rotate freely

2.Turn on the water tap

3.Close the dishwasher door

4.Setting and starting the programme

Turn the programme selector dial clockwise until the number of the programme you wish to select (see "Washing programmes" chart) corresponds with the programme marker on the control panel.

Press the "MAINS ON" push button, the "MAINS ON" indicator light will come on and the programme will start.

5. Interrupting a washing programme

Interrupt a washing programme in progress ONLY if it’s absolutely necessary

To interrupt a washing programme

Attention! Hot steam may escape when the door is opened. There is risk of scalding. Open the door carefully.

●Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point in which it was interrupted.

●pressing the MAINS ON push button (in this case the MAINS ON indicator light turns off). Press the MAINS ON push button again; the programme will start from the point in which it was interrupted.

6.End of the washing programme

The dishwasher will automatically stop.
Switch off the dishwasher by pressing the MAINS ON
push button, the MAINS ON indicator light turns off.
Hot steam may escape from the appliance when opening
the door immediately after the end of the programme,
therefore,	open the door carefully	.

Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance.

Leave the dishes in the dishwasher for approx. 15 minutes, with the door ajar, after the end of programme so that they dry better and will be cooler.

Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one.

When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.