Rinse aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
Ensure that the lid is closed after every refill.
Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.
Use only branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.
Rinse aid can be added in one of two ways:
●If you are using dishwasher detergent that already contains rinse aid, the detergent including the rinse aid is placed in the detergent compartment.
-In this case the rinse aid compartment must be empty. If in the rinse aid dispenser there is still rinse aid you must wait until it has finished before using detergent that contains rinse aid.
●If you are using dishwasher detergent and rinse aid separately, the rinse aid is to be put into the rinse aid dispenser.
-In this case the rinse aid dosage must be set in position from 1 to 6 (see "Adjusting the dose").
Filling with rinse aid
1.Open the container by turning the lid (A) anticlockwise.
2.Add the rinse aid until the container is completely full. The indicator (B) will be completely dark.
3.Top up the rinse aid when the indicator (B) becomes clear.
Adjusting the dose
According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (C) (position 1 minimum dosage, position 6 maximum dosage).
Increase the dose if there are drops of water or lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on the dishes.
BR02 |
BR01 |
BR03 |
In daily use
●Check if it’s necessary to refill with special salt or rinse aid
●Load cutlery and dishes into the dishwasher.
●Fill with dishwasher detergent .
●Select a wash programme suitable for the cutlery and dishes.
●Start the wash programme.
Loading cutlery and dishes
Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher.
●Before loading the dishes, you should:
-Remove large
-Soften remnants of burnt food in pans
●When loading the dishes and cutlery, please note:
-Dishes and cutlery must not impede the rotation of the spray arms .
-Load hollow items such as cups, glasses, pans, etc. with the opening downwards so that water cannot collect in the container or a deep base.
-Dishes and items of cutlery must not lie inside one another, or cover each other.
-To avoid damage to glasses, they must not touch.
-Lay small objects in the cutlery basket.
6