Before use, Setting the water softener

Before use

Before using your dishwasher for the first time:

1.Ensure that the electrical and water connections comply with the installation instructions

2.Remove all packaging from inside the appliance

3.Set the water softener

4.Pour 1 litre of water inside the salt container and then fill with salt

5.Fill the rinse aid dispenser.

Setting the water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance.

The higher the content of these salts, the harder your water is.

Water hardness is measured in equivalent scales, Clarke, French degrees and PPM (parts per Million).

The softener should be adjusted according to the hardness

of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

The dishwasher is factory set at level 2.

If this level is not suitable for your area the softener should be adjusted.

If your water is level 1 it is already soft

Water softener adjustment

AA01

Adjustment on the machine

and therefore there is no need to use salt.

Only for dishwasher models with salt refill indicator light:

if the water softener has been adjusted on level 1 without use of salt, the salt refill indicator light on the control panel will always remain illuminated when the machine is switched on.

AA04

	B
1	2
AA03

To adjust the water softener, follow the instructions given in the chart

		Water hardness
						Use	Water	Adjustment
Level	French		Clarke		PPM	Use	Water	Adjustment
Level	degrees		degrees	(parts per		of	softener	on the machine
	degrees		degrees	(parts per		of	softener	on the machine
	(°TH)			million)		salt	adjustment	A	B

1	0 - 14		0 - 10	0	- 140	NO	-	NO	1
2	15 - 39		11 - 27	141 - 390		YES	-	NO	1
3	40 - 50		28 - 35	391	- 500	YES	+	NO	1
4	51 - 70		36 - 49	501	- 700	YES	-	YES	2
5	71 - 90		50 - 63	701	- 900	YES	+	YES	2