Tricity Bendix CDW 101 Adjusting the worktop, Fitting under a counter, Technical specifications

Page 7
Adjusting the worktop

Adjusting the worktop

You can move the worktop forward or backward by

25 mm in order to align the machine with other kitchen units.

Simply unscrew the two rear retaining screws, move the top to the required position and then retighten the screws.

Fitting under a counter

IN26

(kitchen worktop or sink)

By removing the machine’s worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

Proceed as follows:

-Remove the machine’s worktop by unscrewing the two rear retaining screws, pull from the front and slide out the rear slots, lifting the worktop.

Insert the machine after adjusting height and levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed.

570

-

 

600

820

 

600

 

IN05

 

Technical specifications

Dimensions

Width

60 cm

 

Height with worktop

85 cm

 

Height without worktop

82 cm

 

Max depth

55.5 cm

 

Max depth with open door

115,2cm

 

 

 

Electrical connection

Voltage

220/240 V - 50 Hz

Motor rating during wash

 

200 W

Power of heating element

 

2100 W

Overall power

 

2300 W

 

 

 

Water supply pressure

Minimum

50 kPa (0.5 bar)

 

Maximum

800 kPa (8 bar)

 

 

 

Capacity

 

12 place settings

 

 

 

7

Image 7
Contents INSTRUCTION BOOK DishwasherThe control panel 1. MAINS ON indicator light 2. ON/OFF push button 3. Programme guide7. Programme sequence indicator Description of the applianceOn/Off POWER WASHWashing programmes Hints for test centres2. Check that there is rinse aid and salt 3. Load the dishes 10. Switch off the dishwasherOperating sequence 1. Check the filtersThe lower basket Using your applianceTake care when loading or unloading sharp items such as knives Loading your applianceTo move to the higher position proceed as follows Adjusting the height of the upper basketThe upper basket Before closing the door, ensure that the spray arms can rotate freelykitchen worktop or sink Adjusting the worktopTechnical specifications Fitting under a counterImportant safety information ContentsBefore use Maintenance Installation Safety instructionsConservation Important safety informationInstallation Child SafetyBefore use Setting the water softenerTo adjust the water softener Before using your dishwasher for the first timemay cause corrosion refill indicator windowB A salt indicator light Filling with saltFilling with rinse aid Adjusting the doseOnly for models with rinse aid indicator light Rinse aidCompact detergents with enzymes If using powder detergents proceed as followsIf using detergent in tablets proceed as follows Use of detergentItems not suitable for dishwashers Hints and tipsTo save energy For best washing and drying resultsExternal cleaning Internal cleaningCleaning the central filter Cleaning the large filterThe machine will not start SymptomThe dishes are not clean poor wash Something not workingWater outlet hose connection InstallationLevelling Water supply connectionsEarth Electrical connectionProceed as follows This appliance must be earthedCustomer Care Department Service and spare parts08705 European Guarantee Guarantee conditionsThis guarantee does not cover Standard guarantee conditions2 07/01 Customer care telephone number Electrolux Household Appliances Limited152980 67/0 Tricity Bendix, 55-77 High Street, Slough, Berkshire, SL1 1DZ