Tricity Bendix CDW 101 Filling with salt, may cause corrosion, refill indicator window, float

Page 11

Filling with salt

Filling with salt

Attention!

Only use salt specifically designed for use in dishwashers.

All other types of salt not specifically designed for use in dishwasher, especially table salt, will damage the water softener.

Only fill with salt just before starting a washing programme. This will prevent any grains of salt or salty water, which may have been spilled, remaining on the bottom of the machine, which

may cause corrosion.

The salt container will require topping up periodically.

According to the model, an indicator reminds you when filling with salt:

A) The salt	cap has a	refill indicator window	in the centre.
A green	float	is clearly visible when there is salt inside
the container, and almost disappears when the salt has
finished reminding you to add salt.

SR11

B) A salt indicator light	on the control panel will come on
when the salt has finished.

The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher

remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected..

Do not worry if water over flows from the unit when filling with salt, this is quite normal.

4

SR15

1.Unscrew the cap of the salt container.

SR16

2.Pour 1 litre of water inside the container

(this is necessary only before filling with salt for the first time).

SR17

3.Using the funnel provided, pour in the salt until the container is full.

SR18

4.Remove any trace of salt on the screw thread or on the gasket.

SR19

5.Screw on the cap tightly.

Image 11

Contents INSTRUCTION BOOK DishwasherThe control panel 1. MAINS ON indicator light 2. ON/OFF push button 3. Programme guide7. Programme sequence indicator Description of the applianceOn/Off POWER WASHWashing programmes Hints for test centres2. Check that there is rinse aid and salt 3. Load the dishes 10. Switch off the dishwasherOperating sequence 1. Check the filtersThe lower basket Using your applianceTake care when loading or unloading sharp items such as knives Loading your applianceTo move to the higher position proceed as follows Adjusting the height of the upper basketThe upper basket Before closing the door, ensure that the spray arms can rotate freelykitchen worktop or sink Adjusting the worktopTechnical specifications Fitting under a counterImportant safety information ContentsBefore use Maintenance Installation Safety instructionsConservation Important safety informationInstallation Child SafetyBefore use Setting the water softenerTo adjust the water softener Before using your dishwasher for the first timemay cause corrosion refill indicator windowB A salt indicator light Filling with saltFilling with rinse aid Adjusting the doseOnly for models with rinse aid indicator light Rinse aidCompact detergents with enzymes If using powder detergents proceed as followsIf using detergent in tablets proceed as follows Use of detergentItems not suitable for dishwashers Hints and tipsTo save energy For best washing and drying resultsExternal cleaning Internal cleaningCleaning the central filter Cleaning the large filterThe machine will not start SymptomThe dishes are not clean poor wash Something not workingWater outlet hose connection InstallationLevelling Water supply connectionsEarth Electrical connectionProceed as follows This appliance must be earthed08705 Service and spare partsCustomer Care Department European Guarantee Guarantee conditionsThis guarantee does not cover Standard guarantee conditions2 07/01 Customer care telephone number Electrolux Household Appliances Limited152980 67/0 Tricity Bendix, 55-77 High Street, Slough, Berkshire, SL1 1DZ