Sherwood AX-5103 dimensions Troubleshooting Guide, Problem Possible Cause Remedy

Page 12

AX5103(G)2007.8.174:43PM페이지 12

ENGLISH

Troubleshooting Guide

If your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or our service organization.

PROBLEM

POSSIBLE CAUSE

REMEDY

 

 

 

No power

• The AC input cord is disconnected

• Connect the cord securely.

 

• Poor connection at AC wall outlet or the outlet

• Check the outlet using a lamp or

 

is inactive.

another appliance.

 

 

 

No sound

• Speaker cords are disconnected.

• Check the speaker connections.

 

• Both SPEAKER SELECTOR A and B buttons

• Switch the desired speakers on.

 

are set to off.

 

 

• The volume is adjusted too low.

• Adjust the volume.

 

• The MUTE button on the remote control is

• Press the MUTE button to cancel the

 

pressed to ON.

muting effect.

 

• Incorrect selection of input source.

• Select the desired input source

 

 

correctly.

 

• Incorrect connections between the

• Make connections correctly.

 

components.

 

 

 

 

No recording

• Incorrect connections.

• Make connections correctly.

 

 

 

• Incorrect operation of the tape deck (or MD

• Operate the tape deck (or MD

 

recorder).

recorder) correctly.

 

 

 

13

Image 12
Contents Unpacking and Installation IntroductionFCC Information Read this Before Operating Your Unit AC Voltage SelectionContents Connecting Audio Components Connecting System Control System ConnectionsConnecting Speakers AC Input Cord Switched AC OutletFront Panel Controls Digi Link III System Remote Controls EnglishRemote Control Operation Range Loading BatteriesSystem Power ON/OFF OperationsListening to a Program Source To cancel the loudness effect, press this switch again Recording Recording with Tape 1/MD Recording with Tape 2 MonitorTroubleshooting Guide Problem Possible Cause RemedySpecifications GeneralPhono MM CD, TUNER, Tape Phono MM