Introduction, Rating Plate, Installation

INTRODUCTION

WARNING: THIS APPLIANCE MUST BE EARTHED

RATING PLATE

Record the model, product and serial numbers on the back cover of this instruction book from the rating plate. This is situated on the lower front frame of the appliance and can be seen upon opening the cavity door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).

The appliance must be protected by a suitably rated fuse or circuit breaker. The rating of the appliance is given on the rating plate.

Do not remove the rating plate from the appliance as this may invalidate the guarantee.

INSTALLATION

If your appliance has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your appliance left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact you supplier for advice.

Once the packaging has been removed the appliance should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the appliance as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation in all poles. The cable must have conductors of sufficiently high cross- sectional area to prevent overheating and deterioration.

Six square millimetres (6.00mm2) is the recommended cross-section area.

The cable should be routed away from potentially hot areas marked by X in the diagram below.

To move the appliance, open the oven door, and lift the appliance by holding inside the top of the compartment.

This is a type X appliance, which means it is free- standing and can be fitted with cabinets on one or both sides. It may also be fitted in a corner setting.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm at the either side of the appliance is required to enable the appliance to be moved into position. It is recommended that proprietary trims are fitted to protect the worktops of either side of the appliance. These are available from most DIY stores.

Two spacers have been incorporated into the back of the appliance to ensure an air gap of 10mm is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

10mm gap

SIE 225 specifications

The Tricity Bendix SIE 225 is a freestanding electric oven that epitomizes convenience and efficiency in the modern kitchen. Designed with the user in mind, it combines functionality with sleek aesthetics, making it a popular choice for households that prioritize both performance and style.

One of the standout features of the SIE 225 is its spacious oven cavity. With a capacity of 62 liters, this oven allows for cooking large meals, making it perfect for families or those who love to entertain. The oven is equipped with a fan-assisted cooking system, ensuring even heat distribution for perfectly baked goods and roasted dishes. This technology enables faster cooking times and enhances flavor retention, resulting in delicious, succulent meals.

The Tricity Bendix SIE 225 also boasts a variety of cooking functions. With settings like conventional heat, grill, and fan-assisted cooking, users can select the best method for their culinary creations. The grill function is particularly beneficial for achieving that crispy texture on meats and vegetables, while the convection setting is ideal for baking, ensuring that pastries rise perfectly.

Another key characteristic of the SIE 225 is its user-friendly interface. With easy-to-read knobs and a clear digital display, navigating through settings and timers is a breeze. This intuitive design reduces the learning curve for new users and enhances the overall cooking experience.

Safety is a priority with the SIE 225, which features a cool-touch door that minimizes the risk of burns during and after cooking. Additionally, the oven is equipped with an electronic timer, allowing users to monitor cooking times accurately. This feature is particularly useful for busy home chefs who may need to multitask while preparing meals.

Energy efficiency is another noteworthy aspect of the SIE 225. It is designed to meet modern energy-saving standards, helping users reduce their electricity consumption without compromising on performance.

In terms of maintenance, the Tricity Bendix SIE 225 includes an easy-clean interior, making it simple to wipe down and maintain hygiene in the kitchen. The oven's sleek design is complemented by a modern finish, ensuring it adds a contemporary touch to any kitchen decor.

In summary, the Tricity Bendix SIE 225 is a versatile and efficient electric oven that meets the demands of modern cooking. With its combination of spacious capacity, advanced cooking technologies, user-friendly design, and safety features, it is an excellent choice for anyone looking to elevate their culinary experience.