Rinse aid
Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser, which is positioned inside the door, holds about 110 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
Filling with rinse aid
1.Open the container by turning the lid (A) anticlockwise.
2.Add the rinse aid until the container is completely full. The indicator (B) will be completely dark.
3.Top up the rinse aid when the indicator (B) becomes clear.
(Only for models with rinse aid indicator light)
Top up with rinse aid when the rinse aid indicator light on the control panel illuminates.
Ensure that the lid is closed after every refill.
Do not put liquid detergent in the rinse aid compartment. Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.
Adjusting the dose
According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (C) (position 1 minimum dosage, position 6 maximum dosage).
Increase the dose if there are drops of water or lime spots on the dishes after washing.
Reduce it if there are sticky whitish streaks on the dishes.
A |
BR01 |
B |
|
|
|
|
|
| x | 6 | 5 | 4 | 3 |
|
|
|
| ||
m | a |
|
|
| 2 |
|
|
|
| 1 | |
|
|
|
|
| |
BR03 |
|
|
|
|
|
|
|
|
|
| C |
| x | 6 | 5 | 4 | 3 |
|
|
|
| ||
m | a |
|
|
| 2 |
|
|
|
| 1 | |
BR02 |
|
|
|
|
|
5