Sherwood DD-6200 manual Select the reverse mode

DD-6200(G)2007.3.2910:23AM페이지11

1	Load a tape to be recorded into deck A.	2
			Select the reverse mode.

�Be sure the erase-protection taps on the tape are				: Recording of a single side.
			,	: Recording of both side.
in place.
�The type of tape(normal or chrome) is automati-		�When selecting recording of both sides and
cally detected.
		recording first on the back side, recording is
�The metal tapes are not recorded correctely.
		made only on that side.
3
	When recording with Dolby B NR,	4
			Select the program source to be
	select the Dolby B NR mode.
			recorded.
			Example) When selecting the tuner.

5	Press the RECORD/RECORD MUTE	6	Press the PLAY button to start
	button to enter the recording pause mode		recording.

�According as there are the erase-protection taps or not, the PLAY indicators are flickering as follows ;

: Recordable on both sides.

: Recordable on front side.

: Recordable on back side.

7		8	To make a blank space, press the
	To temporarily stop recording.
			RECORD/RECORD MUTE button in
			the recording pause mode or during
			recording.

�To restart recording, press the corresponding PLAY button.

�The unit will make a 4 second blank space and then enter the recording pause mode.

11