Introduction, For Your Safety Europe Australia

DD-6200(G)2007.3.2910:23AM페이지2

Introduction

CAUTION : TO REDUCE THE RISK OF ELEC- TRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SER-

VICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SER- VICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to consti- tute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appli- ance.

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

FOR YOUR SAFETY

EUROPE

AUSTRALIA

220V

240 V

Units shipped to Australia are designed for operation on 240 V AC only.

To ensure safe operation, the three-pin plug supplied must be inserted only into a standard three- pin power point which is effectively earthed through the normal household wiring. Extension cords used with the equipment must be three-core and be correctly wired to provide connection to earth. Improper extension cords are a major cause of fatalities. The fact that the equipment oper- ates satisfactorily does not imply that the power point is earthed and that the installation is completely safe. For your safety, if in any doubt about the effective earthing of the power point, consult a qualified electrician.

PAN-EUROPEAN UNIFIED VOLTAGE

All units are suitable for use on supplies 220-240 V AC.

CAUTION

•Leave a space around the unit for sufficient ventilation.

•Avoid installation in extremely hot or cold locations, or in an area that is exposed to direct sunlight or heating equipment.

•Keep the unit free from moisture, water, and dust.

•Do not let foreign objects in the unit.

•The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

•No naked flame sources, such as lighted candles, should be placed on the unit.

•Please be care the environmental aspects of battery disposal.

•The unit shall not be exposed to dripping or splashing for use.

•No objects filled with liquids, such as vases, shall be placed on the unit.

•Do not let insecticides, benzene, and thinner come in contact with the set.

•Never disassemble or modify the unit in any way.

■Notes on the AC power cord and the wall outlet.

•The unit is not disconnected from the AC power source(mains) as long as it is connected to the wall outlet, even if the unit has been turned off.

•When disconnecting the power cord from the wall outlet, always pull the plug, not the power cord.

•Disconnect the plug from the wall outlet when not using the unit for long periods of time.

•The wall outlet shall be installed near the unit and shall be easily accessible.

Note on recycling

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations.

When discarding the unit, comply with local rules or regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with the local regu- lations concerning chemical waste.

This product and the accessories packed together constitute the applicable product according to the WEEE directive except batteries.

DD-6200 specifications

The Sherwood DD-6200 is a notable addition to the realm of integrated amplifiers, well-regarded for its combination of advanced technologies and user-friendly design. Targeted towards audiophiles and music enthusiasts, this model showcases a blend of performance and functionality that appeals to a wide range of listeners.

One of the standout features of the DD-6200 is its robust power output capabilities. With a substantial wattage rating across its channels, it ensures that even the most demanding speakers are driven with clarity and precision. This power is complemented by high-headroom and low distortion, allowing for dynamic and immersive audio experiences without compromising on sound integrity.

The DD-6200 is equipped with state-of-the-art Digital Signal Processing (DSP), which facilitates advanced sound customization. This technology allows users to tailor their listening experience, adjusting parameters such as bass, treble, and equalization settings to suit their personal preferences or the acoustics of their listening space. The result is a more engaging and personalized audio experience that can adapt to a variety of musical genres.

Connectivity is another strong suit of the Sherwood DD-6200. Featuring multiple input options, including HDMI, optical, and coaxial digital inputs, as well as traditional analog connections, it seamlessly integrates with a variety of audio sources. This versatility makes it well-suited for use in home theater setups or multi-room audio systems, allowing users to switch between different devices with ease.

The design of the DD-6200 is both stylish and practical, with a sleek finish that complements modern home aesthetics. Its intuitive interface, complete with a remote control, provides users with straightforward navigation through various settings and options.

Additionally, with built-in protection circuits, the DD-6200 ensures safe operation, guarding against potential overloads and short circuits. This reliability adds peace of mind for users who demand high performance without the worry of damaging their equipment.

In summary, the Sherwood DD-6200 stands out as a versatile and powerful amplifier choice, marrying cutting-edge technology with ease of use. Its combination of strong audio performance, customization options, comprehensive connectivity, and stylish design makes it a strong contender for anyone looking to enhance their audio experience. The DD-6200 continues to exemplify Sherwood's commitment to quality and innovation in the audio industry.