Tricity Bendix SE402 installation instructions Introduction, Rating Plate, Installation

Page 8

INTRODUCTION

WARNING: THIS APPLIANCE MUST BE EARTHED

RATING PLATE

This is situated on the lower front frame of the appliance and can be seen upon opening the door. Alternatively the rating plate may also be found on the back or top of some models (where applicable).

The appliance must be protected by a suitably rated fuse or circuit breaker. The rating of the appliance is given on the rating plate.

Do not remove the rating plate from the appliance as this may invalidate the guarantee.

INSTALLATION

If your appliance has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your appliance left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the appliance should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the appliance as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation in all poles. The cable must have conductors of sufficiently high cross- sectional area to prevent overheating and deterioration.

The recommended cross-section area is six square millimetres (6.00mm2).

The cable should be routed away from potentially hot areas marked by X in the diagram below.

To move the appliance, open the main oven door, and lift the appliance by holding inside the top of the compartment.

This is a type Y appliance, which means it is free- standing and can be fitted with cabinets on one or both sides. It may also be fitted in a corner setting.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm at either side of the appliance is required to enable the appliance to be moved into position.

Always ensure an air gap is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

Air gap

Overhanging surfaces or a cooker hood should be a minimum of 685mm above the hob.

It is important to ensure that the appliance is level after installation. Levelling feet are fitted to the appliance to accommodate uneven floors.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents SE402 Technical Details Model NO. SEContents Uses of Defrost Feature Preface Safety During OperationAfter USE GeneralRating Plate InstallationIntroduction General Notes on Using Your Appliance Control Panel Indicator NeonsAbout Condensation and Steam Cooling FAN for the ControlsControl Panel Features Getting to Know Your ApplianceBefore Using the Hotplates for the First Time Sealed HotplatesRecommended Saucepans Hints and TipsDeep FAT Frying PreservingDual Grill Uses of the GrillSelecting the Grill Things to NoteGrilling Chart Food Shelf Grill TimeTOP Oven Uses of the TOP OvenSelecting the TOP Oven To FIT the TOP Oven ShelfHints and Tips Main Oven Hints and Tips Oven Cooking Chart Roasting Chart Roasting ChartSelecting Defrost Defrost FeatureUses of Defrost Feature Care and Cleaning After Cleaning Cleaning the Grill and Oven FurnitureCleaning Inside the Oven and Grill Compartments Care of Stayclean SurfacesSomething not WORKING? Appliance does not work at allService and Spare Parts Guarantee Conditions Standard guarantee conditionsPage Consumer care telephone number 08705

SE402 specifications

The Tricity Bendix SE402 stands out as a versatile and efficient electric oven, designed to cater to the modern kitchen. Known for its reliability and user-friendly features, this appliance is perfect for both novice cooks and seasoned chefs.

One of the most notable characteristics of the SE402 is its sleek and compact design, which seamlessly fits into various kitchen layouts. Its exterior is crafted with a durable finish that not only enhances its aesthetic appeal but also ensures easy cleaning and maintenance.

In terms of functionality, the SE402 offers multiple cooking modes, allowing users to experiment with different culinary techniques. It includes conventional cooking, fan-assisted heat, and grill options, presenting flexibility for diverse meal preparations. The fan-assisted heating technology ensures even heat distribution throughout the oven cavity, promoting uniform cooking and baking results.

The oven's generous capacity is another key feature, accommodating everything from small dishes to larger trays and pots. This means that family meals or entertaining guests becomes less of a hassle, as users can prepare multiple items simultaneously without compromising on quality.

Energy efficiency is also a priority in the design of the Tricity Bendix SE402. With its efficient heating elements and insulation, the oven reduces energy consumption, which is both environmentally friendly and cost-effective for users.

The control panel is intuitively designed, featuring easy-to-read dials and buttons that allow for straightforward temperature adjustments and timer settings. This user-centric approach is further enhanced with a clear LED display, making it easy to monitor cooking progress.

Safety is paramount, and the SE402 does not disappoint. It includes features such as cool-touch doors and a child safety lock, ensuring peace of mind for families.

In conclusion, the Tricity Bendix SE402 is a thoughtfully engineered electric oven that combines modern technology with ease of use. It offers a wealth of features that cater to various cooking needs while maintaining energy efficiency and safety. Whether baking, roasting, or grilling, this oven delivers consistent performance, making it a valuable addition to any kitchen.
Top Page Image Contents