Door reversal directions

1.Disconnect from the electricity supply.

2.Remove all loose items, including food, store food in a cool place.

3.Gently lay the fridge/freezer on its back with the top held away from the floor by 5-8 cm (2-3 inches) of packing;

4.Remove the feet (2-3)

5.Remove bottom hinge (1).

6.Slide out the lower door from middle hinge (H) and remove the latter.

7.Slide out the upper door from pin (G), unscrew the latter and then screw it down into the hinge provided on the opposite side, after having removed the small plugs which should then be fitted on the opposite side.

Unscrew the handle. Refit it on the opposite side after having pierced the plugs with a punch. Cover the holes left open with the plugs contained in the documentation pack.

8.Refit the upper door and the middle hinge on the opposite side.

9.Refit the lower door and bottom hinge (1) on the opposite side.

10.Refit the feet (2-3)

Attention

After completion of the door reversing operation, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdrier.

D715 PIED/M

PR220