Tricity Bendix SIE556 Cleaning Between The Outer And Inner Door Glass, To Remove The Outer Glass

Page 30
CLEANING BETWEEN THE OUTER AND INNER DOOR GLASS

CLEANING BETWEEN THE OUTER AND INNER DOOR GLASS

The outer door glass is removable for cleaning.

TO REMOVE THE OUTER GLASS

1.Open the oven door slightly to gain access to the two cross head screws on the top of the oven door.

2.Loosen the two screws using a Pozidrive screwdriver.

3.Hold the door glass securely in place with one hand before removing the screws completely with the other hand.

4.Using both hands, gently tilt the top of the door glass towards you, lift slightly to disengage the locators from the two bottom brackets.

5.Clean the outer and inner glass using hot soapy water or Hob Brite cleaner may be used with care. DO NOT use Hob Brite on the Stainless Steel or painted finishes. DO NOT try to clean the foil which is inside the door. The foil is there to help keep the door cool, if it is damaged it will not work. Ensure that all parts are well rinsed and thoroughly dried before attempting to replace the outer door.

TO REPLACE THE OUTER GLASS

1.Holding the oven glass with both hands, gently place the locators into the holes of the brackets at the bottom of the oven door.

2.Push the top of the oven glass towards the oven door, ensuring the screw location holes line up.

3.Hold the glass in place with one hand and insert the cross head screws into the location holes with the other hand. Give the screws one turn to ensure the glass is secure.

4.Tighten the screws positively with a Pozidrive screwdriver before closing the oven door.

Do not attempt to use the oven without the glass being in place.

If the door glass panel becomes chipped or has deep scratches the glass will be weakened and must be replaced to prevent the possibility of the panel shattering. Please contact your local After Sales Service who will be pleased to advise further.

TO CLEAN THE INNER GLASS DOOR PANELS

Clean the inner glass door panels using a soft cloth and hot water to which a little washing up liquid has been added. If the inner panel is heavily soiled, Hob Brite may be used. Do not use abrasive cleaning materials on the door glass. Ensure that all parts are well rinsed and thoroughly dried before attempting to replace the glass.

REPLACING THE OVEN LIGHT BULB

The type of bulb required is a 300°C 25 watt small Edison Screw. Part number 572 491 5431-00/1 (Available through your local Service Force Centres).

CAUTION: Disconnect the appliance from the electricity supply before replacing the bulb.

Open the door and remove the shelves to enable easy access to the oven light assembly. Insert a flat blade screwdriver between the oven side and glass which covers the bulb.

Support the glass with your hand and prise out sufficiently to release the glass cover. Unscrew the bulb in an anticlockwise direction until it is possible to remove the bulb with ease.

Fit the new bulb by turning in a clockwise direction until it is secure. Ensuring the indent to the flange is pointing to the rear of the oven, replace the glass by pushing it firmly into the hole to cover the bulb assembly.

Replace the shelves. Restore the electricity supply and adjust the time of day and clock as necessary.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents SIE556 OPERATING & INSTALLATION INSTRUCTIONSPLEASE READ THIS INSTRUCTION BOOKLET BEFORE USING THE APPLIANCE SLIP IN ELECTRIC COOKERWeight TECHNICAL DETAILSMODEL NO. SIE VoltageCONTENTS Uses of Defrost Feature PREFACE SAFETY PLEASE READ CAREFULLY BEFORE INSTALLATIONDURING OPERATION Never leave the appliance unattended when the oven doors are open AFTER USEGENERAL Your safety is of paramount importanceWARNING THIS APPLIANCE MUST BE EARTHED INSTALLATIONINTRODUCTION RATING PLATEABOUT CONDENSATION AND STEAM GENERAL NOTES ON USING YOUR APPLIANCECONTROL PANEL INDICATOR NEONS THE COOLING FAN FOR THE CONTROLSGRILL AND OVEN FURNITURE THE CONTROL PANEL FEATURESGETTING TO KNOW YOUR APPLIANCE A B CDEF GH1. SET THE TIME OF DAY THE ELECTRONIC TIMER2. HOW TO SET THE COUNTDOWN A COOK TIME B END TIME C COUNTDOWN D TIME E DECREASE CONTROLTO CANCEL THE COUNTDOWN 3. SETTING THE OVEN TIMER CONTROLA TO SET THE TIMER TO SWITCH ON AND OFF AUTOMATICALLY B TO SET THE TIMER TO SWITCH OFF ONLY 4. TO CANCEL AN AUTOMATIC PROGRAMME5. TO RETURN THE APPLIANCE TO MANUAL 6. THINGS TO NOTE 7. AUTOMATIC COOKINGRECOMMENDED SAUCEPANS USING THE HOBTHE CERAMIC HOB HINTS AND TIPSPRESERVING HOT HOB INDICATORDEEP FAT FRYING SPECIAL FRYING NOTESELECTING THE GRILL THE GRILLUSES OF THE GRILL THINGS TO NOTEGRILLING CHART thicknessesSELECTING THE TOP OVEN THE TOP OVENUSES OF THE TOP OVEN TO FIT THE TOP OVEN SHELFMost cooking should be carried out using an oven shelf positioned in one of the shelf runners SELECTING THE FAN OVEN THE MAIN FAN OVENUSES OF THE FAN OVEN TO FIT THE MAIN OVEN SHELVESArrange the shelves in the required positions before switching the oven ON. Shelf positions are numbered from the bottom upwards OVEN COOKING CHART manufacturer’sROASTING CHART ROASTING CHARTDEFROST FEATURE USES OF DEFROST FEATURESELECTING DEFROST CLEANING THE PLATED HANDLES CARE AND CLEANINGCLEANING MATERIALS CLEANING THE CERAMIC HOBTO REMOVE DISCOLOURATIONS OR WHITE AND SILVER MARKS CLEANING THE OUTSIDE OF THE APPLIANCECLEANING THE GRILL AND OVEN FURNITURE TO REDUCE HOB SOILAGECLEANING THE DOOR GLASS CLEANING INSIDE THE OVEN AND GRILL COMPARTMENTSCARE OF STAYCLEAN SURFACES Household detergents and bleachesREPLACING THE OVEN LIGHT BULB CLEANING BETWEEN THE OUTER AND INNER DOOR GLASSTO CLEAN THE INNER GLASS DOOR PANELS TO REMOVE THE OUTER GLASSThe grill and hotplates work but the oven does not SOMETHING NOT WORKING?The appliance does not work at all The oven temperature is too high or too low0870 SERVICE AND SPARE PARTSCUSTOMER CARE DEPARTMENT European Guarantee GUARANTEE CONDITIONSStandard guarantee conditions ExclusionsPage Page Tricity Bendix, 55-77 High Street, Slough, Berkshire SL1 1DZ Consumer care telephone number 08705IMPORTANT NOTICE
Top Page Image Contents