READ THIS BEFORE OPERATING YOUR UNIT
FOR U.S.A AND CANADA | 120 V |
FOR YOUR SAFETY
Units shipped to the U.S.A and Canada are designed for operation on 120 V AC only.
Safety precaution with use of a polarized AC plug. However, some products may be supplied with a nonpolarized plug.
CAUTION : To prevent electric shock, match wide blade of plug to wide slot, fully insert.
ATTENTION : Pour eviter les choc electriques, introduire la lame la plug large de la borne correspondante de la prise et poussre jusqu’au fond.
FOR CHINA, EUROPE AND AUSTRALIA | 220V/230V/240V |
FOR YOUR SAFETY
Units shipped to China are designed for operation on 220 V AC only.
Units shipped to Australia are designed for operation on 240 V AC only.
To ensure safe operation, the
Improper extension cords are a major cause of fatalities. The fact that the equipment operates satisfactorily does not imply that the power point is earthed and that the installation is completely safe. For your safety, if in any doubt about the effective earthing of the power point, consult a qualified electrician.
All units are suitable for use on supplies
FOR OTHER COUNTRIES | 115 V/230 V |
FOR YOUR SAFETY
Units shipped to countries other than the above countries are equipped with an AC voltage selector switch on the rear panel. Refer to the following paragraph for the proper setting of this switch.
AC VOLTAGE SELECTION
This unit operates on 115/230 V AC. The AC voltage selector switch on the rear panel is set to the voltage that prevails in the area to which the unit is shipped. Before connecting the power cord to your AC outlet, make sure that the setting position of this switch matches your line voltage. If not, it must be set to your voltage in accordance with the following direction.
AC voltage selector switch
AC 230 V |
|
|
| AC 115 V |
|
|
Move switch lever to match your line voltage with a small screwdriver or other pointed tool.
ENGLISH
3