Tricity Bendix SB 410 installation instructions To FIT the Oven Shelves

lTo operate the oven turn the oven control to the required temperature.

THINGS TO NOTE

The oven indicator neon will glow until the oven has reached the required temperature and then go out.

It will cycle ON and OFF periodically during cooking showing that the temperature is being maintained.

TO FIT THE OVEN SHELVES

The shelves should be fitted with the straight rods uppermost on the frame and the forms towards the back of the oven. If not fitted correctly the anti-tilt and safety stop mechanism will be affected.

Back of Oven

lHINTS AND TIPS

Arrange the shelves in the required positions before switching the oven ON. Shelves are numbered from the bottom upwards.

The oven is fitted with side elements. The top of the oven is the hottest part of the oven and the

lbottom the coolest.

Avoid placing food too close to the side element oven lining to prevent scorching.

Do not line any part of the oven with aluminium foil as it may cause damage or interfere with the air circulation.

For best results always:-

Preheat the oven until the indicator neon goes

lout.

For economy leave the oven door open for the shortest possible time particularly when placing food into a pre-heated oven.