INSTALLATION INSTRUCTIONS
WARNINGS:
THINGS YOU NEED TO KNOW
WARNINGS:
This cooker must be installed by a qualified electrician/competent person. Safety may be impaired if installation is not carried out in accordance with these instructions.
This cooker must be earthed.
Do not remove the screws from the earth tab extending from the oven mains terminal block (Fig. 1).
Before connecting the cooker make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. The rating plate can be seen by opening the top oven door and looking below the oven door seal.
Do not alter the electrical circuitry of this cooker.
CHOICE OF ELECTRICAL
CONNECTION
Fig. 1
The cooker should be operated using at least |
|
6mm² twin core and earth PVC insulated |
|
multicore cable. Please choose from the most |
|
appropriate after reading the descriptions: |
|
By connecting the cooker to a cooker point |
|
having a double pole isolating switch |
|
providing at least 3mm contact separation in |
|
all poles and protected with a fuse or |
|
miniature circuit breaker at your mains fuse |
|
box. |
|
If you wish to connect an oven and a hob to a |
|
cooker point you can, by connecting the oven |
|
and hob separately to the cooker point. See | Fig. 2 |
Fig. 2. |
41