Toastmaster TMGM36, TMGT36, TMGT24, TMGT48, TMGM48, TMGM24 manual Clearance, AIR Supply

Page 4

GENERAL INSTALLATION DATA

This equipment is designed and sold for commercial use only by personnel trained and experienced in its operation and is not sold for consumer use in and around the home nor for use directly by the general public in food service locations.

CAUTION The Toastmaster model griddles are equipped for use with the types of gas specified on the nameplate.

All units are shipped from the factory for use with natural gas. The unit can easily be converted for use on propane gas: See propane gas.

-IMPORTANT-

CAUTION

CAUTION

The installation of theAppliance should conform to the NATIONALFUELGAS CODE "ANSI Z223.1 - LATEST EDITION" AND ALL LOCAL GAS COMPANY RULES AND REGULATIONS.

IN CANADA INSTALLATION SHALL BE IN ACCORDANCE WITH THE CURRENT CAN/CGA-B149.1 NATURAL GAS INSTALLATION CODE OR CAN/CGA-B149.2 PROPANE INSTALLATION CODE AND LOCAL CODES WHERE APPLICABLE.

Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing the equipment.

For your safety, do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Keep the appliance area clear and free from combustibles.

This appliance, its pressure regulator and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of 1/2 PSIG (3.45KPA).

This appliance and its pressure regulator must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 PSIG (3.45KPA). For your protection, we recommend a qualified installing agency install this appliance. They should be familiar with gas installations and your local gas requirements. In any case, your gas company should be called to approve the final installation. In addition, there should be posted, in a prominent location, detailed instructions to be followed in the event the operator smells gas. Obtain the instructions from the local gas supplier.

For your safety, if you smell gas - 1. Do not touch electrical switches.

CAUTION 2. Extinguish any open flame.

3. Immediately call your gas company.

KEEP THE APPLIANCE AREA FREE AND CLEAR FROM COMBUSTIBLES.

CLEARANCE

For use on non-combustible countertops only.

Combustible and non-combustible material must be at least 48" (120cm) from the top of the appliance and 6" (150mm) from the sides and back. Adequate clearance should also be provided for proper operation and servicing.

AIR SUPPLY

Make certain not to obstruct the flow of combustion and ventilation air. Provisions for adequate air supply must be furnished. The legs supplied with the unit must be installed. Make certain that air intake openings in the bottom of the appliance are not obstructed. They are essential for proper combustion and operation of the appliance.



Image 4
Contents GAS Griddle Safety Symbol Retain this Manual for Future ReferenceSpecifications Gas Griddle Clearance AIR SupplyConnecting GAS Supply Line Exhaust CanopyLeveling Unit GAS PipingBurner Adjustment Models Tmgm Burner Adjustment Models TmgtLighting Instructions Pilot Light RegulationGrease PAN Griddle Care NON-CHROMIUM AreasModel TMGM24, TMGT24 26 29 Parts List Qty Description Warranty Statement Page Page Garde EN Mise Seulement MD Modèles Brûleurs DES FonctionnementGAZ DU Provision LA DE Ligne Reliant LA Seulement Tmgt Modèles Brûleurs DES AjustementManuel D’ARRÊT Robinet GAZ DU Pression LA DE Régulateur LEGAZ DE Canalisation Niveau À Mise DE UnitéGarde EN Mise ’INSTALLATION Générales Données ’APPAREIL DE L’ÉCART À Combustible Tout TenezRéparations ET Entretien Avis Future Référence Pour Manuel CE ConservezGAZ a Grils