DOOR REMOVAL / ELECTRONIC CONTROL
DOOR REMOVAL
If door must be removed:
•Unplug the unit or switch the breaker that supplies power to the unit to the off position.
•Remove the plastic top hinge cover.
•Hold the door in place while removing the top hinge from the cabinet.
•Remove the two 3/8” hex head bolts from the top hinge with a 3/8” wrench or socket.
•Lift the door upwards and pull up and away from the cabinet until free of the bottom hinge pin mounted on the front of the cabinet.
•To replace the door, reverse the above procedures and securely tighten all screws to prevent hinge slippage.
CAUTION
Doors are heavy. It is recommended to have two people to remove or replace the door assembly from the cabinet.
Hinge Cover |
Hinge Bolts (2) |
Hinge Plate |
SETTING THE PRO-SELECT™ ELECTRONIC CONTROL
Cool Down Period
For safe food storage, allow four (4) hours for refrigerator to cool down completely. The refrigerator will run continuously for the first several hours.
Pro-Select™ Electronic Control
The
°F
To adjust the temperature setting, press the UP (▲) key for warmer temperature and DOWN (▼) key for colder temperature on the control panel. Allow several hours for the temperature to stabilize between adjustments. The refrigerator can be adjusted between 33°F (1°C) and 46°F (8°C). By pressing the TEMP MODE key, the temperature display will toggle between °F to °C.
To turn the refrigerator OFF, press the UP (▲) key until the warmest temperature setting of 46F° (8C°) shows in the display. Then press the UP (▲) key three (3) times within three (3) seconds to turn the refrigerator OFF. The display will then show “OF”. To turn the unit back ON, press the DOWN (▼) key three (3) times within three (3) seconds. The control will then display “46F° (8C°)” and may be adjusted to the desired temperature.
8