Frigidaire FGHC2335LE, FGHS2332LE, FGHS2332LP important safety instructions Changing the Filter

Page 15

Air Filter (some models)

The air filter is located at the top of the fresh food compartment next to the water filter.

Replacing the Air Filter

In general, you should change the air filter every six months (the filter status light on the control panel prompts you to replace the filter after six months) to ensure optimal filtering of refrigerator odors. You may want to adjust this time period depending on the types and amounts of food you typically store in your refrigerator. To replace you PureSource UltraTM air filter:

1Pull the air filter housing straight out.

2 Remove the old filter and discard it.

3 Unpack the new filter and place it inside the housing.

4 Slide the housing back into position.

Water Filter

The water filter is located at the top right side of the fresh food compartment.

Replacing the Water Filter

In general, you should change the water filter every six months to ensure the highest possible water quality. Water Filter Status on the user interface prompts you to replace the filter after a standard amount of water (200 gallons/757 liters for PureSource 3TM) has flowed through the system.

If your refrigerator has not been used for a period of time (during moving for example), change the filter before reinstalling the refrigerator.

Ordering Replacement Filters

To order your replacement filters, please visit our online store at www.frigidaire.com/store, by calling toll-free at 877-808-4195, or by visiting the dealer where you purchased your refrigerator. Frigidaire recommends that you order extra filters when you first install your refrigerator, and that you replace your filters at least once every six months.

CHANGING THE FILTER

Here is the product number to request when ordering:

PureSource 3TM Water Filter

Part #WF3CB

PureSource UltraTM Air Filter

Part #PAULTRA

More about your Advanced Water Filter

The PureSource 3TM ice and water filter system is tested and certified to NSF/ANSI Standards 42 and 53 for the reduction of claims specified on the performance data sheet.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

Test & certification results:

•Rated Capacity - 200 gallons/757 liters for PureSource 3TM ice and water filter

•Rated service flow - .50 gallons per minute

•Operating Temp.: Min. 33°F, Max. 100°F

•Maximum Rated Pressure - 100 pounds per square inch

•Recommended Minimum Operating Pressure: 30 pounds per square inch

To replace your PureSource 3TM water filter:

It is not necessary to turn the water supply off to change the filter. Be ready to wipe up any small amounts of water released during the filter replacement.

1Turn Off the ice maker.

2Remove the filter by pushing on the end/face of the filter.

3Slide the old water filter cartridge straight out of the housing and discard it.

4Unpackage the new filter cartridge. Using the alignment guide, slide it gently into the filter housing until it stops against the snap-in connector at the back of the housing.

5Push firmly until the cartridge snaps into place (you should hear a click as the cartridge engages the snap-in connector).

6Press a drinking glass against the water dispenser while checking for any leaks at the filter housing.

Any spurts and sputters that occur as the system purges air out of the dispenser system are normal.

7After filling one glass of water, continue flushing the system for about four minutes.

8Turn On the ice maker.

9Press and hold the Water Filter button on the Ice & Water Dispenser control panel for three seconds. When the display changes from Red to Green, the status has been reset.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Use &Care Important Safety Instructions Risk of child entrapment Child SafetyProper Disposal of your Refrigerator or Freezer Electrical informationFeatures AT a Glance Features may vary according to modelSpillSafe Adjustable Shelf Location InstallationInstallation Toe Grille Installation and RemovalTo level the cabinet using the front rollers Door OpeningGuidelines for final positioning of your refrigerator To remove the refrigerator top hinge cover Door Removal InstructionsRequired Tools To prepare for removing the doorsTo remove the freezer door To remove the freezer top hinge coverConnecting the Water Supply Before Installing The Water Supply Line, You Will NeedTo Connect Water Supply Line To Ice Maker Inlet Valve User Interface Setting Cooling TemperaturesSabbath Mode ControlsEnheit to Celsius Filter resetStorage Features Automatic ICE & Water Dispenser Remove and empty the ice storage bin if Cleaning the Ice MakerTo clean the ice maker Ice Maker/Dispenser TipsChanging the Filter Understanding the Sounds you may Hear Normal Operating Sounds and SightsCare & Cleaning Tips Care & CleaningUnited States Canada Before YOU CallCompressor does not Digital temperatureSee Problem column OPENING/CLOSING Walls See Problem column OPENING/CLOSINGExclusions This warranty does not cover the following Major Appliance Warranty

FGHS2332LP, FGHS2332LE, FGHC2335LE specifications

The Frigidaire FGHC2335LE, FGHS2332LE, and FGHS2332LP are three prominent models in Frigidaire's lineup of stylish and efficient refrigerator options designed to elevate kitchen spaces while providing practical features for modern living. These models are equipped with a variety of technologies and characteristics that make them standout choices in the crowded appliance market.

First and foremost, the Frigidaire FGHC2335LE is known for its spacious interior and flexibility. With a generous total capacity of approximately 36 cubic feet, this side-by-side refrigerator features ample storage space to accommodate all of your groceries. Its adjustable shelving system allows users to customize the internal layout, enabling efficient organization of perishable items. The integrated water and ice dispenser provide chilled water and cubed or crushed ice on demand, promoting convenience and encouraging hydration.

Similarly, the FGHS2332LE and FGHS2332LP models also boast impressive capacities, making them ideal for families or individuals who frequently entertain guests. The features like the dual ice makers and plenty of door bins facilitate easy access to frequently used items, simplifying meal prep and joyful cooking experiences in the kitchen. The stainless steel finish not only adds elegance to kitchen décor but also ensures easy maintenance, allowing users to maintain a sleek look without much effort.

These models employ advanced cooling technologies, including the EvenTemp cooling system, which evenly distributes air throughout the refrigerator to maintain optimal temperatures and minimize temperature fluctuations. This technology contributes to longer-lasting freshness for food items, reducing waste and ensuring that groceries stay crisp and flavorful.

Energy efficiency is another hallmark of the FGHC2335LE, FGHS2332LE, and FGHS2332LP. These refrigerators meet or exceed ENERGY STAR standards, signifying that they use less energy than conventional models, helping consumers save money on utility bills while being environmentally responsible.

In terms of accessibility, these models feature easy-to-read LED lighting that illuminates the interior, allowing users to quickly locate items even in low-light conditions. The refrigerators also include humidity-controlled crisper drawers that provide the ideal environment for fruits and vegetables, preserving their freshness for longer.

Overall, the Frigidaire FGHC2335LE, FGHS2332LE, and FGHS2332LP combine style, functionality, and efficiency, making them exceptional choices for anyone looking to upgrade their kitchen appliances. With an array of innovative features and a focus on user-friendly design, these refrigerators are well-equipped to meet the demands of modern lifestyles.
Top Page Image Contents