Frigidaire 241540100 (1203) ICE Dispenser Operation & Care, Turning The Ice Dispenser On And Off

Page 23

Automatic Ice & Water Dispenser 23

ICE DISPENSER OPERATION & CARE

The ice maker, ice bin, and dispenser feeding mechanism are located in the top of the freezer compartment. After the refrigerator is installed properly and has cooled for several hours, the ice maker can produce ice within 24 hours. It can completely fill an ice bin in about two days.

IMPORTANT

The ice maker is turned on at the factory so it can work as soon as you install your refrigerator. If you cannot connect a water supply, turn the ice maker’s On/Off switch to Off. Otherwise, the ice maker’s fill valve may be noisy when it attempts to operate without water.

Using The Ice Dispenser After Installation

Before making ice for the first time, be sure to prime the water supply system as described on page 22. Air in new plumbing lines can result in two or three empty ice maker cycles. Furthermore, if the system is not flushed, the first ice cubes may be discolored or have an odd flavor.

Turning The Ice Dispenser On And Off

Ice production is controlled by the ice maker’s On/Off power switch. Press the switch to the “O” position to turn it Off and press to the “I” position to turn it On.

NOTE

The ice maker also has a built-in wire signal arm, which automatically stops ice production when the ice bin is full. This signal arm should not be used to manually stop the ice maker.

241540100_eb_sxs_Use&Care_En.pmd

23

1/22/2004, 10:34 AM

Image 23

Contents Use & Care Guide Make a Record for Quick Reference Finding InformationPlease Read and Save this Guide Table of Contents Child Safety SafetyImportant Safety Instructions General SafetyElectrical Information To prepare for removing the doors Removing The DoorsGetting Through Narrow Spaces Required ToolsTo remove the refrigerator door To remove the top hinge coverTo remove the freezer door What you will need Connecting The Water SupplyAbout Your REFRIGERATOR’S Water Supply To connect the water supply to the rear of your refrigerator Understanding Features and Terms Feature OverviewAllowing Cooling Time Before USE Controls & SettingsSetting Cooling Temperatures Choosing Fahrenheit or Centigrade Making Temperature AdjustmentsWhat To Do If The Temperature Displays Flash Responding to Alarms Audible Tones & Indicator Lights SYSTEM-MONITORING AlarmsTurning the Cooling System on and OFF Using The Alarm Reset ButtonTo change the position of a shelf Storage FeaturesShelf Features Cantilever ShelvesMeat Keeper DrawersCrispers Crisper Humidity ControlStorage Bins DoorsAccessories Dispensing Water Using the DispenserAutomatic Ice & Water Dispenser Dispensing IceExpress Ice Button Using the Dispenser Control PanelTo prime the water supply system Priming the Water Supply SystemTurning The Ice Dispenser On And Off Using The Ice Dispenser After InstallationICE Dispenser Operation & Care Ice Dispenser Tips Cleaning The Ice DispenserRemove and empty the ice storage bin if To clean the ice dispenserWater Filter Location Ordering Replacement FiltersChanging The Filter Locating the Water FilterMore About Your Advanced Water Filter Replacing the Water FilterTo replace your pure advantageTM water filter Ideas for Storing Foods Storing Food & Saving EnergyLoading the Freezer InstallationTemperature Settings Ideas for Saving EnergyUnderstanding the Sounds YOU MAY Hear Normal Operating Sounds & SightsProtecting Your Investment Care & CleaningVacation & Moving Tips Care & Cleaning TipsTo replace light bulbs Replacing Light BulbsConsumer Warranty InformationBefore YOU Call Solutions To Common ProblemsTemperatures Are Too Cold Water/Moisture/Frost Outside Refrigerator Ice Dispenser Odors In Refrigerator