Door Opening

Installation

NOTE

The refrigerator doors are designed to shut by themselves within a 20 degree opening.

Your refrigerator should be positioned to allow easy access to a counter or table when removing food. For best use of drawers and freezer baskets, the refrigerator should be in a position where both the refrigerator and freezer doors can be fully opened.

Guidelines for final positioning of your refrigerator:

•All four corners of the cabinet must rest firmly on the floor.

•The cabinet should be level at the front and rear.

•The sides should tilt ¼ inch (6 mm) from front to back (to ensure that doors close and seal properly).

•Doors should align with each other and be level.

All of these conditions can be met by raising or lowering the adjustable front rollers.

To level the cabinet using the front rollers:

1Open both doors and remove the toe grille (see “Toe Grille Installation and Removal” in the “Installation” section).

2Close the doors and use a flat-blade screwdriver or

3/8 inch socket wrench to raise or lower the front rollers.

3Ensure both doors are bind-free with their seals touching the cabinet on all four sides.

To level the doors using the adjustable lower hinge (some models):

1Before leveling either door, remove set screw that locks door height into position. (The door cannot be adjusted without set screw removed).

2If the refrigerator door is lower than the freezer door, raise the refrigerator door by turning the adjustment screw clockwise using a 7/16 inch wrench. (See illustration.)

3If the freezer door is lower than the refrigerator door, raise the freezer door by turning the adjustment screw clockwise using a 7/16 inch wrench. (See illustration.)

4After leveling, verify door stop contacts lower hinge and top of door does not contact upper hinge through full movement of door (from fully closed to fully open).

5Reinstall set screw, locking the door height.

6Replace the toe grille by fitting it into place

(see “Toe Grille Installation and Removal” in the “Installation” section).

FRS26ZRFW3, FRS26ZRFD1, FPHS2687KF0, FRS26ZSH, FRS26ZRFW0 specifications

The Frigidaire FGHS2367KE, along with its counterparts like the FRS26ZRFD2, FRS26ZRFB3, FRS26ZRFW2, and FRS20ZGH, represents a range of reliable refrigerators designed to enhance modern kitchens with efficiency and style. Each model is tailored to meet the needs of families, offering features that prioritize convenience, organization, and advanced cooling technologies.

The FGHS2367KE is a side-by-side refrigerator that boasts a stainless steel finish, giving it a sleek and modern appearance. With a 22.5 cu. ft. capacity, it provides ample storage space for groceries and leftovers. Notably, its adjustable shelving and humidity-controlled crisper drawers allow users to customize the interior layout based on their storage preferences. This model also includes ice and water dispensers on the exterior, making accessing refreshments simple and convenient.

Similar features can be found in the FRS26ZRFD2, which also offers a spacious layout and efficient cooling capabilities. Its energy-efficient design helps reduce electricity consumption while maintaining optimal freshness for stored items. Users benefit from features like the adjustable gallon door bins that accommodate various container sizes, showcasing Frigidaire’s attention to user-friendly design.

The FRS26ZRFB3 and FRS26ZRFW2 share the same robust features, including deep door bins and an adjustable shelving system that makes organization straightforward. The bright LED lighting system is a standout characteristic, illuminating every corner and reducing energy usage compared to traditional bulbs. Both models maintain a consistent interior temperature, ensuring food stays fresh longer.

The final model in this lineup, the FRS20ZGH, is slightly smaller but packed with features that cater to smaller kitchen spaces without compromising on functionality. It includes a frost-free freezer and various organizational solutions tailored for efficient storage.

All these Frigidaire models embody advanced technologies such as advanced cooling systems and high-performance compressors that minimize temperature fluctuations. Their easy-to-use controls enhance the user experience, allowing quick adjustments to settings for maximum efficiency.

In conclusion, the Frigidaire FGHS2367KE and its related models represent an ideal combination of innovative design, energy efficiency, and thoughtful organization. Whether for large families or smaller household needs, these refrigerators are equipped to handle modern demands while ensuring food stays fresh and easily accessible.