Frigidaire FRS26HR4AW3, FRS23H5ASB3 manual Before Installing The Water Supply Line, You Will Need

Page 5

Installation - Connecting Ice Maker To Water Supply

To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator from electrical power before connecting a water supply line to the refrigerator.

To Avoid Property Damage:

•Copper tubing is recommended for the water supply line. Water supply tubing made of ¼” plastic is not recommended since it greatly increases the potential for water leaks. Manufacturer will not be responsible for any damage if plastic tubing is used for supply line.

•DO NOT install water supply tubing in areas where temperatures fall below freezing.

•Chemicals from a malfunctioning softener can damage the ice maker. If the ice maker is connected to soft water, ensure that the softener is maintained and working properly.

IMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes.

Before Installing The Water Supply Line, You Will Need

•Basic Tools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver

•Access to a household cold water line with water pressure between 20 and 100 psi.

•A water supply line made of ¼ inch (6.4 mm) OD, copper tubing. To determine the length of copper tubing needed, you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).

•A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve.

•A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.

NOTE: Water line kit number 5303917950, available from your appliance dealer at additional cost, contains 25 feet (7.6 meters) of ¼ inch OD copper tubing, a saddle type shutoff valve (nonpiercing), (2) ¼ inch brass compression nuts, (2) ferrules/sleeves, and instructions for installing a water supply line.

To Connect Water Supply Line To Ice Maker Inlet Valve

1. Disconnect refrigerator from electric power source.

2. Place end of water supply line into sink or bucket. Turn ON water supply and flush supply line until water is clear. Turn OFF water supply at shut off valve.

3. Unscrew plastic cap from water valve inlet and discard cap.

4. Slide brass compression nut, then ferrule (sleeve) onto water supply line, as shown.

5. Push water supply line into water valve inlet as far as it will go (¼ inch). Slide ferrule (sleeve) into valve inlet and finger tighten compression nut onto valve. Tighten another half turn with a wrench; DO NOT over tighten.

6. With steel clamp and screw, secure water supply line to rear panel of refrigerator as shown.

7.Coil excess water supply line (about 2½ turns) behind refrigerator as shown and arrange coils so they do not vibrate or wear against any other surface.

8. Turn ON water supply at shutoff valve and tighten any connections that leak.

9. Reconnect refrigerator to electrical power source.

10. To turn ice maker on, lower wire signal arm (see ice maker front cover for ON/OFF position of arm).

IMPORTANT: It takes approximately 24 hours for the ice maker to begin producing ice. Air in new plumbing lines may cause ice maker to cycle two or three times before making a full tray of ice. New plumbing may cause ice to be discolored or have poor flavor. Discard ice made during the first 24 hours.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 240389305 Please Read and Save These Instructions Welcome & CongratulationsFor Your Safety Important Safety InstructionsChild Safety Proper Disposal of Your Refrigerator or FreezerInstallation To Connect Water Supply Line To Ice Maker Inlet Valve Before Installing The Water Supply Line, You Will NeedDoor Removal Instructions Door Removal InstructionsTo Remove Refrigerator Door To Remove Freezer DoorFeatures At a Glance Cool Down Period Temperature ControlsRefrigerator & Freezer Controls Temperature Adjustment To adjust cantilever shelves Cantilever Shelf AdjustmentLooking Inside ICE Cream Shelf Some ModelsSpecial Item Rack Some Models Adjustable Door BinsDoor Storage Tall Bottle Retainer Some Models Crispers Some Models Humidity Control Some ModelsDeli Drawer Some Models Meat Keeper Some ModelsAutomatic ICE & Water Dispenser Operating Instructions Automatic Ice and Water DispenserHow the Water Dispenser Works ICE and Water Dispenser FeaturesHow the Ice Dispenser Works ICE Dispenser TipsRemove and empty the ice storage bin if Cleaning the ICE DispenserPureSource TM * Ice and Water Filter some models To change filter Changing the FilterEnergy Saving Ideas Food Storage & Energy Saving IdeasFood Storage Ideas Normal Operating Sounds & Sights Care & Cleaning Chart Care & CleaningReplacing Light Bulbs Vacation and Moving TipsRefrigerator Warranty Warranty InformationOPENING/CLOSING of DOORS/DRAWERS Before You CallDOORS/DRAWERS Problem CauseWarm Ice maker is not making enough iceRefrigerator Cause CorrectionCANADA, Canadá

FRS26HR4AQ3, FRS23H5ASB3, FRS26HF7BB0, FRS23KR4AW5, FRS26HR4AB3 specifications

The Frigidaire FRS26HF7BW0, FRS26HR4AW3, FRS23KR4AB5, FRS26HR4AB3, and FRS23KR4AW5 are a collection of reliable side-by-side refrigerators known for their blend of functionality, style, and innovative features. These models are designed to cater to the needs of modern households while ensuring efficient refrigeration and freezing.

One of the prominent features of these Frigidaire models is their spacious interior, which provides ample storage options. The refrigerators come with adjustable shelves that allow users to customize the storage space according to their needs. With a combination of clear crisper drawers and fixed shelving, organization becomes easy and convenient, promoting an efficient kitchen environment.

Additionally, these refrigerators are equipped with the Advanced Filtration Technology, which ensures that the water and ice dispensed are free from impurities. This feature not only guarantees better-tasting water but also enhances the overall quality of drinks served from the refrigerator.

The exterior design of these Frigidaire models includes a water and ice dispenser, providing quick access to refreshing drinks. The models come with a stylish finish that complements various kitchen decors, seamlessly fitting into any home environment. The LED lighting featured inside brightens every corner, making it easier to locate items even in low-light conditions.

Energy efficiency is a key characteristic of the FRS series. These refrigerators are ENERGY STAR certified, which means they meet strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This certification indicates that they consume less electricity compared to standard models, helping homeowners to save on energy bills.

Another essential attribute is the Frost-Free Defrost System, which helps prevent ice buildup in the freezer compartment. This technology simplifies maintenance and ensures that users can access frozen items without hassle. Furthermore, the models are constructed with durable materials that promise longevity and reliability.

In terms of capacity, each model has been designed with family needs in mind, providing plenty of room for groceries and larger items like party platters or bulk purchases. The thoughtful arrangement of shelves and bins helps to keep items organized and easily accessible.

In summary, the Frigidaire FRS26HF7BW0, FRS26HR4AW3, FRS23KR4AB5, FRS26HR4AB3, and FRS23KR4AW5 refrigerators stand out for their user-friendly features, energy efficiency, and spacious interiors. They embody Frigidaire's commitment to quality and innovative technology, making them an excellent choice for any home looking to enhance their kitchen experience.
Top Page Image Contents