Frigidaire Essential Guide for Connecting Water Supply to Your Refrigerator
Page 16

CONNECTING THE WATER SUPPLY

WARNING

To avoid electric shock, which can cause death or severe personal injury, disconnect the refrigerator from electrical power before connecting a water supply line to the refrigerator.

•A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type shutoff valve.

•Do not re-use compression fitting or use thread seal tape.

•A compression nut and ferrule (sleeve) for connecting a copper water supply line to the ice maker inlet valve.

CAUTION

To Avoid Property Damage:

•Copper or Stainless Steel braided tubing is recommended for the water supply line. Water supply tubing made of ¼ inch plastic is not recommended to be used. Plastic tubing greatly increases the potential for water leaks, and the manufacturer will not be responsible for any damage if plastic tubing is used for the supply line.

•DO NOT install water supply tubing in areas where temperatures fall below freezing.

•Chemicals from a malfunctioning water softener can damage the ice maker. If your home has a water softening system, ensure the softener is maintained and working properly.

NOTE

Check with your local building authority for recommendations on water lines and associated materials prior to installing your new refrigerator. Depending on your local/ state building codes, Frigidaire recommends for homes with existing valves its Smart Choice® water line kit 5305513409 (with a 6 ft. Stainless Steel Water Line) and for homes without an existing valve, Frigidaire recommends its Smart Choice® water line kit 5305510264 (with a 20 ft. Copper Water Line with self-tapping saddle valve). Please refer to www.frigidaire.com/store for more information.

IMPORTANT

Ensure that your water supply line connections comply with all local plumbing codes.

Before Installing The Water Supply Line, You Will Need:

•Basic Tools: adjustable wrench, flat-blade screwdriver, and PhillipsTM screwdriver

•Access to a household cold water line with water pressure between 30 and 100 psi.

•A water supply line made of ¼ inch

(6.4 mm) OD, copper or stainless steel tubing. To determine the length of tubing needed, measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Use &Care Important Safety Instructions Proper Disposal of your Refrigerator or Freezer Electrical informationRisk of child entrapment CFC/HCFC DisposalGrounding type wall receptacle Features AT a Glance Features may vary according to modelInstallation InstallationLocation Door openingLevel Refrigerator & Adjust Doors Leveling Freezer Drawer if necessaryTo level the freezer drawer Guidelines for final positioning of your refrigeratorTo adjust the door stop To adjust the flipper mullion Door Removal Instructions Getting through narrow spacesTo prepare for removing the doors To remove the top hinge coversWater Line Approximately Feet Installing Freezer Drawer Removing Freezer DrawerInstalling Door Handles Door Handle Mounting Instructions for FrigidaireDoor Handle Mounting Instructions for Frigidaire Gallery Allen set screw B with supplied Allen wrench Connecting the Water Supply Before Installing The Water Supply Line, You Will NeedTo Connect Water Supply Line To Ice Maker Inlet Valve Valve InletControls Setting cooling temperatures Options May VaryAlarms Sabbath ModeUsing the ice maker after installation Automatic ICE & Water DispenserPriming the water supply system Ice maker operation & careIce maker/dispenser tips Cleaning the ice makerRemove and empty the ice bin if Automatic ICE Maker Freezer Turning the ice maker on and offIce maker tips Quick Ice FunctionShelf features Storage FeaturesDrawers Accessories varies by model To change the position of an adjustable door binDeli drawer Storage binsFreezer Features varies by model To Remove Lower BasketDairy compartment To Remove Upper BasketDividers Removal Ideas for storing foods Storing Food and Saving EnergyIdeas for saving energy Normal Operating Sounds and Sights Understanding the sounds you may hearChanging the Filter Replacing your PureAdvantageTM air filter Page Care & Cleaning Tips Part What To Use Tips and PrecautionsCare & Cleaning Removing the Ice Chute Extension For CleaningOrdering Replacement LED Lights Replacing LED Lights select modelsTo replace LED Lights LED Light Incandescent Lights 40-watt bulb 5305514148Before YOU Call Automatic ICE Maker Ice cubes Are freezingTogether Dispenser Ice & WaterPressure is ExtremelyLow Water notTemperature Runs tooMuch or too LongMajor Appliance Warranty Exclusions This warranty does not cover the following

DGHF2360PF specifications

The Frigidaire DGHF2360PF is a standout refrigerator that blends functionality and modern design, making it an ideal choice for contemporary kitchens. With its sleek stainless steel exterior and French door configuration, this model not only offers generous storage but also enhances the aesthetic appeal of your culinary space.

One of the main features of the DGHF2360PF is its spacious interior, providing an impressive total capacity that efficiently accommodates a variety of groceries and meal preparations. The interior is thoughtfully designed with adjustable shelves and clear bins, allowing users to customize the space according to their needs. The included humidity-controlled crisper drawers keep fruits and vegetables fresh for longer, while the door bins offer added convenience for frequently accessed items.

The refrigerator is also equipped with advanced cooling technologies that ensure optimal temperature control. The Frost-Free feature prevents ice buildup, eliminating the need for manual defrosting. The dual evaporator system maintains separate temperature zones for the refrigerator and freezer compartments, ensuring the freshness of food items while providing efficient cooling. Furthermore, the Efficient LED lighting illuminates the interior, making it easy to find ingredients even in low light conditions.

Another standout technology in the DGHF2360PF is the stainless steel finish, which not only offers a modern look but is also resistant to fingerprints, making it easier to maintain a clean appearance. The electronic controls with digital display allow for precise temperature adjustments and monitoring, enhancing user convenience and food safety.

Energy efficiency is a key characteristic of the Frigidaire DGHF2360PF, as it is designed to meet Energy Star guidelines, helping homeowners save on energy costs while reducing their carbon footprint. Additionally, the refrigerator operates quietly, contributing to a peaceful kitchen environment.

In conclusion, the Frigidaire DGHF2360PF combines style, space, and efficiency, making it a top choice for those seeking a reliable refrigerator that meets the demands of modern living. Whether you’re storing everyday groceries or preparing for a family gathering, this refrigerator offers the features and technologies needed to keep your food fresh and organized.
Top Page Image Contents