Frigidaire 241567600 warranty Installation

Page 4

Installation

This Use & Care Manual provides specific operating instructions for your model. Use the refrigerator only as instructed in this Use & Care Manual. Before starting the refrigerator, follow these important first steps.

LOCATION

•Choose a place that is near a grounded electrical outlet. Do Not use an extension cord or an adapter plug.

•If possible, place the refrigerator out of direct sunlight and away from the range, dishwasher or other heat sources.

•The refrigerator must be installed on a floor that is level and strong enough to support a fully loaded refrigerator.

•Consider water supply availability for models equipped with an automatic ice maker.

INSTALLATION

Do Not install the refrigerator where the temperature will drop below 55°F (13°C) or rise above 110°F (43°C). The compressor will not be able to maintain proper temperatures inside the refrigerator.

Do Not block the toe grille on the lower front of your refrigerator. Sufficient air circulation is essential for the proper operation of your refrigerator.

Installation Clearances

•Allow the following clearances for ease of installation, proper air circulation, and plumbing and electrical connections:

Sides & Top --------------- 3/8” Back ------------------------ 1”

DOOR OPENING

NOTE: If your refrigerator is placed with the door hinge side against a wall, you may have to allow additional space so the door can be opened wider.

Your refrigerator should be positioned to allow easy access to a counter when removing food.

LEVELING

All four corners of your refrigerator must rest firmly on a solid floor.Your refrigerator is equipped with adjustable front rollers to help level your unit.

To Level Your Refrigerator:

1. Remove toe grille.

2.Use flat-blade screwdriver or 3/8” socket wrench to adjust front rollers.

NOTE: Raise the front of the refrigerator enough so the doors close freely when opened halfway. The refrigerator should slope ¼” to ½” from front-to-back. Then level the refrigerator from side to side.

WATER DISPENSER DRIP TRAY

The drip tray for your refrigerator’s water dispenser comes from the factory detached. Its removal also allows easy cleaning. To install the drip tray, fit it into the bottom of the dispenser bay and snap into place.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Use & Care Manual Welcome & Congratulations Please Read and Save These InstructionsImportant Safety Instructions For Your SafetyChild Safety Proper Disposal Ofyour Refrigerator or FreezerInstallation Before Installing The Water Supply Line, You Will Need To Connect Water Supply Line To Ice Maker Inlet ValveDoor Removal and Reversal Instructions Door Removal InstructionsTo remove freezer door To remove refrigerator doorFeatures At a Glance Refrigerator & Freezer Controls Temperature Adjustment Temperature ControlsCool Down Period Shelf Adjustment Looking InsideAdjustable Door Bins Door StorageTall Bottle Retainer Some Models Special Item Rack Some ModelsHumidity Control Some Models Wine Rack Some ModelsWater Dispenser & Ice Service Water DispenserWater pressure must not exceed 100 lbs. Excessive pressure mayICE Maker Do Not place the ice container in your dishwasherPureSource TM * ICE and Water Filter some models System StartupChanging the Filter To change filterFood Storage Ideas Food Storage & Energy Saving IdeasEnergy Saving Ideas Understanding the Sounds YOU MAY Hear Normal Operating Sounds & SightsDrain Pan Nonremovable Care & Cleaning Outlet Before CleaningWear gloves when replacing light bulbs to avoid cuts Replacing Light BulbsCondenser Short Vacations Long Vacations MovingWarranty Information Refrigerator WarrantyFreezer temperature too cold Refrigerator temperature isSatisfactory Refrigerator temperature too cold Freezer temperature is

241567600 specifications

The Frigidaire 241567600 is a highly regarded appliance component, specifically designed as a refrigerator ice maker assembly. This part is essential for those who want to enjoy the convenience of automatic ice production right from their refrigerators, enhancing the overall functionality of the appliance.

One of the main features of the Frigidaire 241567600 is its compatibility with a variety of refrigerator models. This versatility allows it to be a reliable replacement part for numerous Frigidaire models, making it an ideal choice for homeowners looking to restore their refrigerator's ice-making capabilities. The assembly is constructed with durable materials, ensuring long-lasting performance and resistance to wear over time.

The technology incorporated in the Frigidaire 241567600 focuses on efficiency and optimal ice production. The ice maker operates smoothly and quietly, producing clear, well-formed ice cubes that are perfect for beverages and entertaining. With a user-friendly design, the ice maker is easy to operate and maintain, requiring minimal effort to keep it in good working condition.

Another noteworthy characteristic of this ice maker assembly is its energy-efficient performance. Designed to minimize energy consumption, it not only helps in reducing utility bills but also aligns with eco-friendly practices by lowering the overall carbon footprint of your household.

The ice maker comes with a straightforward installation process, making it accessible for those who prefer to tackle home repairs themselves. Clear instructions often accompany the product, allowing for a quick setup that can be carried out with minimal tools.

Overall, the Frigidaire 241567600 stands out in the realm of refrigerator accessories due to its reliability, ease of use, and efficient performance. For homeowners invested in maintaining their refrigerator and enhancing its features, this ice maker assembly is an excellent choice. Whether for daily use or entertaining guests, having an efficient ice maker readily available is indeed a valuable asset in any modern kitchen.
Top Page Image Contents