Microwave Combination Oven Specifications

Microwave Combination Oven

FPMC2785K F 27" Electric

Microwave Combination Oven Specifications

•Product Shipping Weight (approx.) – 220 Lbs.

•Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz AC only electrical supply with ground required on separate circuit fused on both sides of line.

•Connected Load (kW Rating) @ 240 / 208 Volts = 6.4 / 5.6 kW

•Amps @ 240 / 208 Volts = 26.7 / 26.9 Amps

•Recommended Circuit Breaker – 30 Amps

•Always consult local and national electric codes.

•Minimum 21" clearance for oven door depth when open.

•Suggested distance from floor is 11-1/2". Minimum required distance is 4-1/2".

•Minimum 23-1/2" deep cutout dimension is critical for proper installation, to ensure that oven’s faceplate will fit flush against cabinet front.

•Full oven base of solid plywood or similar material required, capable of supporting 225 Lbs.

•Base must be level and cabinet front must be square.

•Microwave Combination Oven is NOT approved to be used in stackable or side-by-side installation.

Note: For planning purposes only. Refer to Product Installation Guide on the web at frigidaire.com for detailed instructions.

USA • 10200 David Taylor Drive • Charlotte, NC 28262 • 1-800-FRIGIDAIRE • frigidaire.com CANADA • 5855 Terry Fox Way • Mississauga, ON L5V 3E4 • 1-800-265-8352 • frigidaire.ca

Accessories information available on the web at frigidaire.com

Specifications subject to change.

FPMC2785K 02/11

Printed in the U.S.A.